gollfy

Right here goes :roll: 1993 Corrado G60 Problem: Fuel pump priming constantly with ignition on What I have found: Somebody has put and earth wire straight to the smallest pin on the fuel pump relay What I have tried: Taking the wire off, pump primes for a few seconds as it should. but car does not start as no fuel being delivered Put the wire on, pump primes ALL the time and car will start Was advised to get a new fuse box then an ECU which I have done but I still have the problem I know this one is a messy one, but trying to have a go before I send to a proper auto electrician. Any idea's guys Thanks everyone

Have put the earth back on the lamda sensor and all seems fine now I hope, will check the hall sensor though, can never be too safe. Thanks everyone for your help

OH NO :( :( Had a look at the lamda plug, looks as if somebodies been messing and black wire is broke off *feck*

It had a brand new distributor last year, just strange as it starts no probs cold but warm it dont want to know. Think its something down to fuel system as plugs are bone dry

Cheers for the advise mate, will try it when I get home from work. Would that stop the delivery of fuel, causing the car not to start? Thanks again:)

Hi all, Wonder if you can help me with this one. 1993 G60 Corrado Kicks up first time from cold however when engine is warm it will not start. Checked plugs and they are bone dry?? Have changed fuse box and Ecu so far, any idea's please would be very greatful Thanks guys