dannyc

i would remove it all together if i could afford to have the boot smoothed and resprayed

thanks for the replys, i think the next step is to check all the fuses and if that dosen't help i'll be on ebay looking for a new lever.

Quality :lol: Floking is another option and looks good, like on the rally cars. check out this link to passionford and tony turbos RST. if you've got time have a look through all the 30 odd pages, its a very well modded RST 8) http://www.passionford.com/forum/viewto ... start=1320

Hi all every since i bought my C the rear wiper hasn't worked and i just thought it was a blown fuse, but when getting my headlights looked at by an auto electrican it came on. I said how did you manage that cos i've tried pushing and pulling it in every direction and had no joy, he didn't know what he had done. My brother also has a C so i know all your suposed to do is push the lever forwards. when i do it the water sprays out on the rear window but the wiper dosen't work. What do you think could be causing this? and what does the sliding button do with 0 - 1 - 2 - 0 on it cheers :lol:

My screen has also been badly fitted, causing it to leak. I've been told that the only way to fix it is to have it refitted, but i'll need a new screen cos its impossible to get corrado screens out without breaking them. So before i go down this expensive route do you think i should try adding more silicon sealer? if so do i just need to pull the rubber back and fill the gap?

H8RRA i can't belive this actually works, i took them off and couldn't see a differene on the back, gave it a try anyway and it worked Brilliant! its not often things get fixed that easily

http://cgi.ebay.co.uk/VW-Corrado-rear-s ... dZViewItem sort it out bench boys

Hi my heater speed only works on numder 4, which is very annoying. any ideas?

the rear armrest is the best thing about the corrado interior imo, it looks cool as fuck with two little bucket seats in the back

if it is the fan inlet duct seal would it only make the passenger side wet? mine is wet on both sides so is mine more likey the heater matrix?

I've decided to just get a set of lower springs for now cos my funds can't stretch to coilover money. does anyone know of a company that makes -80mm springs?

is the any difference in terms of harshness/ feeling the bumps between the two?

wow thats alot of dollar is the ride noticably smoother cos feeling all the bumps really pisses me off. how do you adjust the height? is it a wheel off job or do you adjust the top of the strut?

Thanks for all the replys, some very nice pics posted 8) it looks like FK Konigsport Coilovers are the way forward. How much am i looking at for a set of these? reaper1_3 whats the difference with your FK highsport coilovers? are they just a cheaper version? Oettinger SLC and JBOB what are you and your mates using? cheers danny :D

i want it as low as this, do you think this is 60mm?

try again

i've not long owned my corrado and the suspenion was already fitted. the recipt says it lowered by 50mm but it looks more like 20. How low have you got yours? can you show a pic? is there a specific make that i should buy? heres a pic of mine, does that look 50mm to you?

you can just buy springs but the ride will be very bouncy. you'll be looking at least 80 quid for a set of springs and you can pick up a full kit from about 190ish. spax start from around 250. the ride will become harsher if your runner low profiles.

I've had the same problem with mine, its really annoying cos mine has had a recent new windscreen fitted but it was with the previous owner at the time so i done know how well it was fitted. But i think its the heater matrix tho cos it has a slow leak. How much does it cost to buy a matrix?

yeah that would be good to have the new blue bulbs

i only put this up cos i read a post last week where someone asked a similar question about the cig lighter bulb. he got a answer with the exact bulb type. it would of just saved me stripping the dash and taking the old bulbs out only to have to rebuild it all, drive to the shop and back again, strip and rebuild.

just before i start to strip my dash, does anyone know what type of bulbs i need for the clock, abs and back light. and can i pick them up from halfords or is it a trip down to the stealers :lol:

and do you think it will clean up ok?