flatg40

Actually shipping is nearly as expensive as the kit. What I would like is to fit a kit like JMR sells. With custom hubs and vented rotors. Please someone help me ! :) thanks

Hi, I tried to talk many times to John from JMR, but I had no answer yet. I would like to fit some 280mm discs on my Corrado for rear brakes, and I would like to know what parts I have to use. What car are the rotors from (280mm 5x100 vented rotors) ? What are the calipers ? For the hubs I know they must be made from OEM Corrado rear discs. Is there someone on this forum who can make me the brakets to fit the calipers ? Do I need any other parts ? I had a look on the 280mm rear brake thread, but I found no answers to my questions. Thanks a lot for your help.

Hi, What are the parts of the JMRacing kit, and what is the price ? I am looking for a 280mm rear brake kit for my Corrado, but it is hard to find one with plain rotors.. Thanks

Hi there, I wonder what size of spacers I would need if I want to fit Brembo's four pot calipers behind genuine BBS LM 17x7,5 ET40 ? :scratch: does anyone have the answer ? Thanks

Hello, What spacer size did you fit behind the LM, to let enough clearance for the Brembo's ? thanks

Up !! What is the price of these parts now ? Still cheap ?

Hi there, I want to remove the OEM oilcooler to fit a Mocal oil cooler with thermostatic plate. I know I need 2 water pipes from Golf MK1, but I can't find the partnr. on the forum. Could anyone give me the correct partnr. to help me to order them ? thanks

Hi there, what sould be the dimensions of the ports on a supersprint manifold for G60 ? I bought one on ebay, but they are too small for the CNC head I just received from G Werks team !! thanks

Did anyone ever try the SLS Cam (256/276) ? they sell it as the best for G60...

Hi all, i have an oil cooler to fit on my G60, with a thermostatic plate. So the oem water/oil plate must be remove. But what do I do with the water hoses ? Do I have to connect them together or to close them ? thanks for answers to a oil cooler newbie :)

thanks for your answers. any other opinions to confirm this information ?

I have a Weitec Ultra GT kit to fit on my G60, and I have also all the parts for Vr6 top mounts. The springs are made for G60, so i bought the 110mm spring plates from VW, but there is a problem : the plate doesn't stay at the top of the stalk. The hole diameter is too big. Are the VR stalks bigger than G60 ones ? Or is it ok ?

What is the weight of these replicas ?

Hi there! Where can I find these BBS LM replicas now ? The group buy topic doesn't exist anymore ???

I had the bolt 5 last week, so no problem with it. But the support 17 is not possible to buy anymore. So I would like to know if I really need it...

Question to people who fitted golf fmic : Will I need these parts to fit the fmic from golf on my corrado ? parts 2 (retainer) and 17 (support) ? thanks

ok thanks for the advice !! but how to contact G werks by email ? I am in France I sent them many mail but no answers. Are they in hollidays ?

any other feedback from cnc head owners ?

Hi everybody, I am interesting in buying a CNC head for my rado G60, but I would like to know if there are drawbacks with this head. Is the fuel consumption a lot higher ? Is the engine noiser ? Is the engine more difficult to use in classic drive ? My car is a daily, and I would like an engine as smooth as the original one, but with more BHP 8) So is all good with this head ?

3 wires means analogue (blink code) diagnostics - VAG-COM not useable. blink code ok, but how to get these blink code ? How can we have the fault codes on G60 engines ?

I would like to fit a WI system with a nozzle just after the IC, but should I necessary remove the return pipe to the G-lader ? Can it absorb water, as the flow is cut as soon as the boost is down ? Does anyone here use WI w/o removing the return to the G Lader ?

Does the big valves head keep a good torque at low revs ? What are the best mod to improve the torque curve (I don't need lots of power at high revs) ?