Jump to content

W3RKD

Members
 View Profile  See their activity

  • Content Count

    3,897

  • Joined

Everything posted by W3RKD

  1. W3RKD
    Yes They should be Fine over the 280's
  2. W3RKD
    Andy they would be perfect for your car. I knoow the seller of these and will garentuee that they will be amazing
  3. W3RKD
    Have you got access to Air ian as i can lend you our Snap-on leak down tester.
  4. W3RKD
    Etos is your only hope - and actually quite nice once you get familler with it
  5. W3RKD
    You should be able to scan all the basic setting on the 2001 caddy as we have one and regulary have it plugged in .
  6. W3RKD
    U actually get a KOni adjuster in the konigsport kits so this will definalty fit. We can supply h&r ones next day if you give me the coller size.
  7. W3RKD
    I should be able to supply you these with no problems, Do you require 40mm across the axle ?
  8. W3RKD
    double-6s, PM Sent
  9. W3RKD
    Yes We are a suppiler for H&R i will confirm current prices and stock availability for you Will.
  10. W3RKD
    H&R's are no longer adjusatble for compression and rebound they come pre set from the factory to match the suppiled spring rates. V3's are i would expect Gaz/Leda ohlins etc could also build you a bespoke set should you require also. HTH Darren
  11. W3RKD
    very smart indeed. These wheels work for me in 17"x8"
  12. W3RKD

    G60 8v Cyliner heads

    W3RKD replied to rmn's topic in Engine Bay

    Data Showing comparasion between out std/BV heads..
  13. W3RKD

    G60 8v Cyliner heads

    W3RKD replied to rmn's topic in Engine Bay

    here is the data for the std valve head.
  14. W3RKD
    If you want a square profile tyre i would go no more than 2" i would also strongly recomend going for stainless rims to due to maintenance reasons (although they do add to the unsprung weight)
  15. W3RKD

    G60 8v Cyliner heads

    W3RKD replied to rmn's topic in Engine Bay

    Our Std Valve Heads Are £550 + Vat Big Valve heads Start from £1100 + Vat Eurospec heads i belive start from around 2600 euro (unmachined) RMN if you want one ill knock off £150.00 to you for that displacer. Im not sure what the other heads cost nowdays, If anyone would like any flow data please feel free to pm me/ post up here and ill put them up.
  16. W3RKD
    Are the geniune BBS bolts ?
  17. W3RKD
    maurice's Son was driving said mk1 at the time...
  18. W3RKD
    i had Khumo's on my 9" borbets and they dont look/handle as well as the the dunlops or Zero' neros
  19. W3RKD
    Looking Great...:lol:
  20. W3RKD
    Have you tried unpluging the Lambda and taping open the WOT switch ? What happens under load when you carry this test out ?
  21. W3RKD
    here you go -
  22. W3RKD
    thankyou - its been over 3 months very hard work but the ends there now.. From this - To this..
  23. W3RKD
    Were now live - :lol: i fixed the phone lines myself and we back with phones and net access...
  24. W3RKD
    Would just like to say, our apologies to anyone who has had difficulties getting in touch with us over the last week. We have moved premises and BT have made a Royal F**k up of all of our phone lines and Broadband. We should be back to normal by Monday at the latest and only have very limited (i.e. home) internet until that time. Thank you Darren.
  25. W3RKD
    we can also get a chrome powder coat done now which give some great low maintenance results
×
×
  • Create New...