Jump to content

C. Will Corrado G60 2

Members
 View Profile  See their activity

  • Content Count

    538

  • Joined

Everything posted by C. Will Corrado G60 2

  1. C. Will Corrado G60 2
    I'd be interested in one of the extended spoilers/wings. Let me know when you plan to make the purchase.
  2. C. Will Corrado G60 2
    Thanks for the info, dam shame as it's only one corner!
  3. C. Will Corrado G60 2
    ... cleaning the car the other day and noticed one of the all red rear tail lights has a frosted appearance to it. Am I right in thinking the lacquer has gone in some way? How can I fix it? Can i just rub it down and re-apply some more lacquer? Don't really want to buy more, but also concerned I won't be able to match them up. Any help would be great.
  4. C. Will Corrado G60 2
    Any news on this?
  5. C. Will Corrado G60 2
    Thanks for the info guys, I knew 9.5's were pushing it. The last thing I want, is to spend a load of cash and the rims don't fit! I don't want to pull the arches as most don't look right. Looks like it'll be 9's with around a 17et.
  6. C. Will Corrado G60 2
    The time has come to finally replace my wheels. Money is nearly banked for some Schimdit modern line 3-piece rims, but the question is. Will a 16x9.5" fit a Corrado G60 (4 Stud) with rolled arches? I know it's pushing it really but it's not a daily and I want a fat low look. Has anyone had experience with 16x9.5" rears? Or am I being stupid as 9's with look great and give me a little room to play with? Cheers
  7. C. Will Corrado G60 2
    I have Lupo arm now, but want to clean up the look of the car. The guys at StormSipers were very helpful and said it just needs a bit of spacing out and should work fine. I'll update you when I play around with it.
  8. C. Will Corrado G60 2
    Anyone?
  9. C. Will Corrado G60 2
    Got hold of a storm single and tried fitting it today, but have a couple of issues. The first issue is the mech is hitting the car body and seems to be moving around. The second one, is when fitting the wiper. The bonnet hits the wiper arm. Seems like I have the wrong arm. Does anyone have experience of fitting one of these kits on a early bonnet corrado? Cheers
  10. C. Will Corrado G60 2
    I don't like the idea of driving without a bonnet, plus I'd prefer not to get more attention than I already do. I like the think though. :D :D Looks like I need a van.
  11. C. Will Corrado G60 2
    Interesting solution. maybe worth a try apart from I have someone who wants my bonnet.
  12. C. Will Corrado G60 2
    I thought as much, makes it all a little expensive. My need a rethink.
  13. C. Will Corrado G60 2
    Dam, this not gives me a problem. The bonnet is in the Midlands and I need to get it to London. May have to courier it. Any ideas how much?
  14. C. Will Corrado G60 2
    I only ask as I want to pick up a new bonnet but the Corrado is the only car I have. Has anyone had a Corrado bonnet in a Corrado boot?
  15. C. Will Corrado G60 2
    True! the tinting I've just completed looks great too. I'll get some picks posted soon.
  16. C. Will Corrado G60 2
    Sounds simple, but I can see this going horribly wrong!
  17. C. Will Corrado G60 2
    A ha I thought that's how they work. If you know where that wiring diagram is that would be great. Did your in-pros pass the MOT? yes mate passed no probs i dont think you need your main beems on when your high beams are on however ive never seen any other cars lights work like it must be a grey area :D Cheers mate, they've been on a while but I just couldn't remember how they work. Wanted to make sure I hadn't wired them up wrong.
  18. C. Will Corrado G60 2
    A ha I thought that's how they work. If you know where that wiring diagram is that would be great. Did your in-pros pass the MOT?
  19. C. Will Corrado G60 2
    I've just finished tinting my in-pro headlights and after fitting them have realised the following. If the driving lights are on and you turn on the full beam(flash) on, the driving light goes out leaving the Full beam and the angle eyes on. Is this right? I would have thought the driving light would stay on?! Have I wired this back up wrong? Does anyone with In-pros have the same problem? Cheers
  20. C. Will Corrado G60 2
    Thanks for the info, a right angle won't work, you could drill a small pilot hole but then you'd have to remove the suspension to drill from underneath. Just makes the job a big job.
  21. C. Will Corrado G60 2
    I'm changing my plastic cover for a metal version, the plastic version is bolted down but the metal one requires studs in the head which then have nuts to hold it in place. Where can I get hold of the studs and nuts?
  22. C. Will Corrado G60 2
    It just seems strange that Eibach would put mounting holes in location which is impossible to get to on the Corrado. Ok, not impossible but you can't drill straight due to the Bulkhead.
  23. C. Will Corrado G60 2
    Also could you please scan your instrutions so I can what Eibach say to do.
  24. C. Will Corrado G60 2
    I think the mounting holes are going to be different between Mk2 Golf and Corrado versions of the same strut. Do you have a photo of your strut?
  25. C. Will Corrado G60 2
    Anyone out there who's fitted a MK2 Eibach upper strut brace?
×
×
  • Create New...