87 Jetta 16v

Hello mate, No, lets not bother wasting the postage. If you want to strip the mech out as a replacement for your current handle that might work for you? Do you want to drop me a PM with an amount you would like for a refund and I will get it back to you ASAP :) Cheers, N.

Hi there, Not good news with the handle. That would probably explain why it was "floppy" then! Do you want to bolt it in and see how the fit is? When I removed it it was working perfectly. If you are not happy with the fit I am happy to refund. Thanks, N. ---------- Post added at 8:31 PM ---------- Previous post was at 8:28 PM ---------- Hi Andy, I don't have either to hand, that said, I might have an abs light somewhere. Trying to have a clearout of stuff that I am not going to use atm. I'll let you know. How is the vrt going? Cheers, N.

All packed and ready to post tomorrow. Cheers. N.

Hi Neil, I have dropped you a PM, Cheers, N.

Hi there, Would £24 posted in the UK sound ok? I don't have the key, but if I were you, I woulds swap the barrel over so it matches your other locks. It's only one circlip :)

Erm, one of each actually... :$ They are both the same fitment, just look a little different around the key slot....

No problems. I will drop you a PM with payment details. ---------- Post added at 4:34 PM ---------- Previous post was at 4:28 PM ---------- Hi Neil, I have just taken a good look, the late one is indeed the drivers side. It worked perfectly on removal, latched and unlatched perfectly and sat correctly, however it is a bit floppy when not in the door...please let me know if that is still ok with you. Thanks, N. ---------- Post added at 4:35 PM ---------- Previous post was at 4:34 PM ---------- My apologies Dave. I bought one of your kits years ago and it looked very similar. My mistake. I have amended the first post. ---------- Post added at 4:36 PM ---------- Previous post was at 4:35 PM ---------- Hi Dan, I am happy with that. I will drop you a PM with payment details. Thanks, N.

Hi all, I have a few bits and bobs that I no longer need that could be of use to someone. All items are located in Reading Berkshire, however, I can post at cost. VR6 Clocks. Temperature guage not working, everything else is perfect, and can be switched out for other guage. Approx 110k mileage. £20 Boot carpet. Humped type. £10. 1.8 16v KR inlet manifold. £20 Passenger glass. Has been etched, but no scraches. £5 1.8 16v KR Warm up regulator. Has had stealth WUR mod. £20 Thanks for looking, Neal.

And bump :)

And bump :)

And bump :)

Prop sold, carpet still available :)

Just the 16v box remaining now. Open to offers on this one :)

Hi all, I have some brand new valvetrain for VW mk2 / mk3 Golf / Jetta / Corrado 16v models. Wil also fit Audi 6a & ACE engines. The parts I have are: Titanium valve retainers, made by Supertech out of aircraft grade titanium. These weigh 8 grams on the kitchen scales I have. A good performance upgrade to reduce valve float at high RPM. These retail at over £240 in the UK. I would like £200 for them. I have a full set of 32 genuine VAG ABF valve springs. These will fit all vw 16v engines of the types listed above. These are more than £160 from VW. I would like £120 for these. Finally, I have a set of 16 ferrea valve seats. These are £70. I would like £40 for these. All prices are collected from Reading. I can post at cost if needed. Thanks for looking.

Hi all, I have one spare tyre that I am not going to use. It's a michelin pilot, 205 / 40 / 17 5 - 6 mm tread. No punctures or repairs. £25 collected from Reading, Berkshire. Thanks for looking

Does anyone want to swap their set of black leather doorcards for my cream leather set? Mine are late type. Please let me know if you can help. Thanks.

Sounds like a plan. Do you want to PM me your phone number and we can work on some logistics? Cheers, N.

No problems, that said, I might have a spare flat one too. I will take a look...

Hi James, I will be going up to Lincoln from Reading on the first weekend in the new year if that helps at all?

Hi there, Full size... ---------- Post added at 7:07 PM ---------- Previous post was at 7:06 PM ---------- No problems. I will drop you a PM.

Hi all, I have a spare humped boot carpet and also a bonnet prop if that helps anyone. I would be looking for £10 collected for the carpet, and £5 collected for the prop. Located in Reading. I can post at cost if needed. Thanks for looking, N

I still have this if anyone would like to help make some space in my garage...

A Christmas bump for offers on these two... Don't be shy :)

Just a final reminder, a large batch of parts end tomorrow evening around 7.30pm. Almost eveything is 99p with no reserve so please feel free to have a bid if something is of use. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221145355558&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562 Thanks for looking

I think I might have one in the garage. Let me take a look tomorrow night.