87 Jetta 16v

A quick weekend bump. A batch of parts are ending tomorrow from 8 pm. Almost everything is still 99p so If there is anything you want, please have a bid. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221142057406&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562 Thanks for looking.

Some more parts added tonight. Lightenend and balanced vr6 flywheel with almost new clutch, some internal type 19 rarities such as a fader switch, 16v fuel pump, stub axles, jetta boot carpets, door trims, windows, fuel rail, etc etc. As always, everything is 99p with no reserve. Please take a look and have a bid. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221145371638&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562 Thanks for looking.

A few more odds and ends added last night. More to come next week including a lightened and balanced VR flywheel, clutch, some mk2 rarities and interior trim. I will upload when I have actually taken some decent photos. As always, everything is 99p with no reserve so please take a look and if anything is of use, have a bid. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221142057406&ssPageName=STRK%3AMESELX%3AIT&rt=nc&_trksid=p2047675.l2562 Thanks for looking.

I think I have a leaking brake servo. I must have damaged it taking it out to replace some gromets in the bulkhead. That is going to be a pig to change because...almost everything I put in over the weekend will need to come back out. Arrrgghhhh!!

Well, it's alive, and the first miles since 2010. A few "teething" issues though :(

No problems. All the better to keep it "in the case" then :) I know the feeling with the "lots to do" :( I am open to offers on the whole box should you be interested.

To get the FD off would mean pressing off the gears from one of the shafts, and obviously doing the opposite on your VR box. It is much more simple to replace all of the internals with those from the mk3 16v box, the ratios are nigh on identical, and this way you won't need to replace some associated bearings either as this box was silent in use. It also means you wouldn't have to drill out the diff rivets either, unless you are looking to fit an LSD.

In a word, not yet, I will be putting the heavy grade dynamat on the bulkhead, but I am going to get the car running first. Dash will be out next year as IMO it is too low at the moment, my legs barely clear the bottom of the steering wheel and I'm not that tall at 6'. The floor and tunnel are yet to be covered, but I figure they could be easier than the doors, quarters, inner arches and bootlid. It all will be done though, just a matter of when!! ---------- Post added at 12:29 PM ---------- Previous post was at 12:27 PM ---------- No, as Kev says, just drilled to shave off a few grams (and you really don't save much either!!). Fingers crossed that it still works... ---------- Post added at 12:35 PM ---------- Previous post was at 12:29 PM ---------- Shame the rest of the install doesn't look quite so smart at the moment :(

Hi there, To be honest, if I was selling the final drive I would be asking for about the same as I would for the whole box, and being in a box, it is nice and protected from the elements :)

So, a few little bits of progress: Some sound insulation: Some heat insulation: With all this insulation I will be needing some shove to move the car along: the schrick cams in: And some weight out: Keep water out with this: Keep water in with this: Experimenting with some headlights, lightly smoked? I am hoping to get the car running next weekend for the first time in a long time. Fingers crossed!!

And bump :)

I still have the pistons, open to offers on them should anyone be interested? Thanks, Neal.

And a quick bump :)

Hi there, Looking at your pictures, it has the module attached to a home made bracket. With the coilpack, this is built in and has the 3 pin connector attached to the coil pack (you can just see the top of it in the picture)

I have an ignition coil from a 4 cylinder car. See below. They bolt through the coilpack and into the bulkhead.

Some more parts are ending on Sunday from 8.30 PM. I will also be listing some more parts on Sunday so please feel free to drop back into the link below for another look. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221124561712&sspagename=STRK%3AMESELX%3AIT&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562 Thanks for looking

And a quick bump, another batch of parts ending tonight, pretty much everything is still 99p so go and grab yourself a bargain if there is something that you need :) http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221121352210&viewitem=&sspagename=ADME%3AX%3ARTQ%3AGB%3A1123&rt=nc&_trksid=p4340.l2562 Thanks for looking.

Some more parts added tonight, though I will be adding more parts next week that could be more useful. As always, everything is 99p with no reserve. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221121355594&sspagename=STRK%3AMESELX%3AIT&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562 Thanks for looking.

Hi all, I am in Reading, Berkshire. I don't really want to post, I packed up a sunroof about a year ago and it took an age, about three rolls of tape and that wasn't glass. I am just too busy with my projects, work, and trying to get rid of small bits by post that I would really prefer collection. Thanks, N.

Hi there, Yep, thats correct. Thanks, N.

Hi all, I have a moonroof from a passat b4 estate. It needs a new part that is still available from VW (part number 1H0 818 017) for £18. I would like £20 collected for this if it helps anyone. Thanks for looking.

A whole load of parts ending this weekend from 8 PM tonight. Everything is 99p with no reserve so if anything is of use, please have a bid. I will be adding more interesting parts over the next few weeks so keep coming back to check. http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221117355254&sspagename=STRK%3AMESELX%3AIT&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562 Thanks for looking.

MOre parts added tonight, badges, trim, leather gearknob, ABS pump, door handles, locks, fan controller, plus all of the other parts that are yet to end. All are 99p with no reserve so if anything is of use, please have a bid. Thanks for looking http://www.ebay.co.uk/sch/neal.humphries/m.html?item=221117336032&sspagename=STRK%3AMESELX%3AIT&rt=nc&_trksid=p3984.m1555.l2649&_trksid=p4340.l2562

Cam pos, inlet pipe, lock covers, coilpack & grill VR badge all sold :) The rest still for sale...

Hi all, I am clearing my garage and have some more parts that I just don't need. A full factory aircon setup, interior, some ABF parts and a whole load of passat parts if anyone needs them. Everything is 99p with no reserve so if something is of use, please take a look and have a bid. http://www.ebay.co.uk/sch/neal.humph...id=p4340.l2562 Thanks for looking.