paddy26

Hi,

If it is the bolt that keeps spinning with the nut the easiest way to tighten it is to get a prybar or level and apply force down on top of the tie rod end. You should get another person to catch one end of the prybar under the chassis and then push down on the other end of the prybar to apply the pressure to the top of the track rod end while you try to tighten the nut. You will probably need to apply a lot of pressure to the tie rod end.

To remove the tie rod from the rack just do what r4-ge said. You can let the stilson hit up against the underneath of the car and then all you have to worry about then is the spanner on the nut. If you can't loosen it this way you will need to heat it up using a gas torch. Just be careful with the WD40 and the flame!

Hope this helps.

Paddy

http://www.vagcat.com/

http://www.bugmenot.com/view/vagcat.com

You should get most parts numbers you need on this site.

http://www.amazon.co.uk/Pioneer-DEH-P60 ... B0011ECEAS

I have this one and really like it. Looks OEM and works with my iphone and ipod. I think someone else on here has it as well. Can probably get it cheaper elsewhere.