TimDoc

Aux belt tensioner - remind me if you have a VR or not? if so is this the Serpentine belt tensioner?? If so I have one, will check bearing later for signs of squeak, I also have the trim but the front screw hole is slightly broken, could easily put a clip on it that would hide the break.

Let me know matey

Tim

or..... I have one available now, new 1 year ago, posted for £23 as I am no longer going to get more than that!!

Tim

OK matey, I reckon £8 posted for the vents and how many clips do you want for the switches??

Tim

have one - near perfect in DBP if you're willing to respray, off a late VR6, based in bath

Tim

I have a block and head (separated), likely 1 and 6 oval'd so not a good runner currently - will likely need a rebore - based in bath, block is yours collected for £1, head i think is good nick so would want a little more for that!

:)

Tim

sorry matey, checked mine and has an A at the end so dont think any good for you

T

Not in Tor Red, but have the wingmirror in DBP if you dont find one...

PM me if you dont get one.

T

Is it just the dash vents that you want or the centre console for them to go in?? Can sort you out with either as have some spare vents also?!

Could also sort out those little metal clips for the switches - how many do you want?

PM me if interested

T

Bottom right, being honest as you're looking for a mint one there are some minor levering marks on the right side of where the stereo goes, not too bad but they are there, there's a photo on my photobucket page 3, the link to this is on page 1 of my breaking thread.

Let me know if you're keen still.

T

pleasure mate!

T

tis indeed my favourite, will pm you with details once all parts out in one piece - hopefully later on :)

Tim

right - will remove the ignition barrell today and also the locks from the handles, boot mech coming with the lock attached.

Tim

I have one but again missing one of the screw holes for the heater controls, doesnt seem to cause any rattles or flex though.

Tim

£10 posted?? PM if keen.

Tim

hi do you have the bits i need? how much posted? and how do you want paying? cheers

PM'd

T

Looses me money but if you can then Pats plan sounds best!!

Let me know how you get on.

Tim

Can do you the full set with 2 keys - I just need to learn how to remove the ignition barrel from the steering column - can anyone enlighten me??

As it is all coming with 2 keys (and possibly the key code if i can find it) I will be asking £50 for the lot (posted).

Located in bath - please PM me if you are interested.

Tim

If you can confirm they are in perfect working order, good condition and undamaged I will take them at your asking price of £18 delivered thanks. How would you like payment to be made? please pm to finalise details

Regards

Gareth

Gareth, they are in perfect working order, good condition but there is a slight crack following close inspection on one of the plastic covers, once fitted it is not noticable and doesn't affect how well the cover stays on. All bolts available with the locks.

PM'd you.

T

Do you still have these? Both door locks bolts and covers.

Yep! Still available.

T

---------- Post added at 05:31 PM ---------- Previous post was at 05:29 PM ----------

bit i need is 5-4-6-7-2-8 what condition are the top mount in? do i need new ones of them do you think?

All in good condition other than number 8 on both sides which is rusty but still sound ad could be cleaned up quite nicely.

Shall we say £18 posted for the lot??

T

what corrado is this normally found on?

T

Do you have the rubbers and the metal bits that the radiator fixings bolt into that are held in with rubbers into the slam panel vr6 only I think cheers from malc

I probably have the metal pieces and possibly the rubbers - will look, but i know for a fact that they are a little rusty.

Tim

miracles happen ----> bumper available in bath - collection available today!! Is DBP in colour with no damage - looking for the price i would get for it should it sell with someone wanting the plastic - £60 collected

07980267163

Tim

yep - got them off yesterday - can u remind me which pieces you want

T

Ok - will do it for £20 posted tomorrow.

Tim

thanks for the advice!

T