BigD
-
Content Count
69 -
Joined
Everything posted by BigD
-
ok mate il give them a ring.
-
well the top of my window seal came out the day after i had it fitted :? doesnt look to have any sealer under it, so il have to do it, anyone recomend some good stuff ?
-
is the pilkington one that bad then :? i had one fitted today not realy been out to test it, it also has a green tint along the top of the screen, it only cost me £176 which i didnt think was to bad as my policy didnt cover it .
-
pmsl :lol: well its definatly something to consider as either way il need a new motor :( . cheers guys.
-
whats a rough going rate for a good engine then ? sounds like a worth while swap if its more reliable then the 2.9 8)
-
how do you get around the 4 wheel drive then on these ? dont realy know much about them tbh, but it could be an option if i dont fix the vr lump.
-
i thought id update my post to show my new wheels 8) . it took me a few hours to get the fronts to fit without spacers as i had to grind a lot of my calipers back :lol: . before after. also fitted this which sounds cool as hell. i had to cut the pipe shorter so the filter is under the bonnet now though as it was making the throttle cable stick :( so i need a couple inches of samco to get it fitting right again.
-
cheers, i have a mate that does good rates so if it was around that it doesnt seem to bad.
-
looks realy nice mate, whats the going rate for this conversion ? if my vr dies il probably look into doing it 8)
-
i wouldnt at 105.9 :shock: most fuel comes from one refinery any ways. nice looking corrado mate.
-
well ive done on side :lol: took me a few hours as a lot of trying the wheel shaving the caliper was repeated but these are the results :shock: before now :lol: but it fits now, although there was a little catching i have to sort.
-
nice mate cheers 8) looks enoghu room to clear without any spacers at all :D cheers again. dave
-
an that will be safe :shock: if so, thanks very much :D next job is to get a rad :(
-
on my calipers it has a bar that gose from top to bottom of the caliper which is causing my problems, ive highlighted it here :lol: is that what you shaved ?
-
any chance of a pic mate ? ive managed to get bolts, but with them being 10mm out the treads to far out now and it looks crap tbh, ive been told mk3 golf vr6 calipers are different but im not so sure. if i could get away with a few mm less it wouldnt be to bad.
-
there et15 aswell mate thats why i thought they'd go straight on, ive bought spacers but that will bring them out to et5 lol , and hope fully my bolts will be here tomorow.
-
anyone ? i have search, just cant ind anything on websites other than 4 stud bolts which i beleave to be smaller.
-
ive bought some 9x16 borbets to go on my vr, the rears fit fine 8) but the fronts hit the calipers :( what size spacers have people used ? and where do i get longer studs from. cheers dave.
-
i thought id bump this as i got a blooming good quote today, for a standerd windscreen with the rubbers, all fitted. £150 plus the vat 8) il report back how it goes when its done next week hopefully.
-
not the best as im using a touch pad, but it guves you an idea.
-
strange for a car to not have one :lol: i wasnt sure to start with, but decided that before the needle touched the pin id better put some more in lol.
-
anyone know the cost to get a windscreen replaced as my insurance wont cover it :( .
-
why not ? its never been done before, plus its cool as fook 8) one less skyline is no bother.
-
bugger, my mate had a txt asking if he new of someone with a silver saxpoooo that had a dented wing as one was stolen from a car in town :shock: who the fook takes just a wing ffs.
-
il have to sort some standerd shocks and springs to get them off then, an stick them on the bay :( there dampening adjust yeah, its a realy nice ride but i want to be lower :lol: