Karoliz

Which fuse is spoiler fuse?? (i didn't find in fuse list such one...)

Didn't want to create new topic -so here's the problem: Spoiler worked perfectly - till yesterday... I've just started the car and spoiler came up - now its rised and not moving down when pushing spoiler control button... What might be the problem? -The button, relay, sth else?...

I'm not sure i've understood you correctly - did you meen, that external coolant pump might not be working because of faulty fan relay - nr. 15?? Edit: this might be wrong relay sheme, cause it's taken from corrado slc manual...

No suggestions? :(

Well guys, I'm totaly lost now... As i mentioned befor my vr6 coolant hoses are very hard - after some driving it's almost impossible to press them... Checked the head gasket with CO test - everything seems to be ok, car is not overheating - temperature always stays between 90-95 degrees. Coolant tank cap is changed with new one (VAG original).... Whole system is bleeded properly (i think so :) ) (don't see any air bublles coming when engine is working and coolant tank cap is taken off)... Only problem i've found - that external electrical coolant pump is not working (i've tried to connect it to battery directly - it is working, but for some reason voltage is not coming to the plug... - maybe one of the fuses???) - may this be a couse of too high pressure? Any ideas?... Thanks

I'm using Eibach strut bar from mk2 - it fits, but you have to relocate coolant tank, because tank cap goes right under strut bar, so it becomes diffcult to unscrew the cap.

Last year my vr6 thermostat housing broked, ant coolant hoses cracked twise... Will have to check preasure too... Hope it's not head gasket...

Everything will be ok with speedo, but rev counter will be very inaccurate. U can use your old cluster, just put on new style vr6 clocks and needles...

Is it possible somehow to fit such brakes (TT's 312mm) on G60 ( 4 stud hubs) ?...

Hi, Maybe anybody has a picture of an installed front lower stress bar (eurosport or any other...) Thanks ;)

Hy guys, Also noticed same oil temperature problems yesterday. While driving in city conditions oil temperature stays between 100-105. But when i go on hihgway (speed 80-110 mph) oil temp reaches even 130... (water temp. stays normal) So is this normal??? Or one day it can cause engine crack :? Probably i have to install oil cooler, because such temperatures are making me worry...

Hy guys, My windows stoped working - they are working only when drivers side doors are opened... What might be the problem?.. And, i don't know if its related (or just a coinsidence), that mirrors stoped working either... Thanks for the help

You can find LCD mod in Oichan's page http://www.oichan.org ;)

about 30 cm long (12 inch)

Here are faces in .psd . So if somebody likes them - just print and stick them ;)

OK, I'll try to make short list: Here is blacklight for illumination: I've printed these faces and sticked them on the old ones.. As I mentioned before needles are used from audi 80 ant painted with red fluorescent paint and I've used red fluorescent tape for redline. And I guess you all know aboud reverse LCD mod...

well I'dont have... - didn't had camera, when I was making this mod... But I guess I could explain everything in words if you'll meet any problems when making such cluster...

I'll will take some pictures in daylight, don't have them now... Yes, it's prinrted on paper, but on special one, which is damp-proof. - time will show if it's true :D

I've just finished my cluster mods... In fact its very simple modification: I've changed my gauges design with photoshop and sticked them on the old ones... Illumination is made with blacklight. Needles are taken from audi 80 (needles fits perfectly, just need to short one of them for the tach.). Needles are painted with red fluorescent paint.

Very nice :twisted: I guess it's turbocharged g60....

1/8 miles in 7.1 sec

:D :D :D :D

Shortly: it's converted to syncro, engine 2.0 L, eaton s/c + turbo and NOS. It' took about 5 years to build this corrado, couse it was lots of gear box and diff failures till it bagan "run" like this...

Just wanted to show, the fastest lithuanian corrado... Maybe it will be interesting for you :) Video http://s53.yousendit.com/d.aspx?id=172GVLR1V87XG0MQ4OJB56BE5R And some photos http://www.redline.lt/magazine/featured-cars/article/article/7/2/neste/1/

Hy guys, One guy has offered me stut brace taken from golf III (strut brace for the front, a lower front strut tie bar and a rear brace). But will it fit corrado g60? Thanks a lot for the info