sean1380
Members-
Content Count
65 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by sean1380
-
well iv removed my isv n all is running fine n dandy but should it not be running with it?? can it cause damage to run without it??
-
haha quality it looked sweet tho zipping through the traffic,was sat avin sum lunch outside the great northern railway warehouse place the car stood out against all the other mundain pap in town n was good to see another one on the road :clap: even if it had a tow bar!haha ill let u off!
-
haha no the wire didnt fill me with much joy neither brake pipes still like that as iv ot got any money now to fix it....wanting to sell it now im that peeved off with it to be honest,cant figure out why its idling sooo high neither and i just wana set fire too it...not enjoying the drive anymore.... :ignore:
-
red corrado in manchester city centre thoday about 12ish think it had personal plate and even a tow bar!! anyone on here??
-
well i cant really drive it any less as iv got no other transport n not going bak to public transport with those other nutters again!haha ill have to risk the bores n get mini sorted so can pull it off the road get more stuck in ill get another lenght of pipe for now n new lambda sensor if not then i think i might just av to get it too a garage
-
well just drove 2my girlfriends house n now and it just flashes up warning light on the temp part but gauge still doesnt work,stiil over rev's so im lost might it something to do with the map??
-
well ill try tracking down some piping too,is this the pipe i come off for a boost gauge inside the car too?? where might i get some from?? i replaced the black and blue sensor today n made no difference at all....might it be lambda sensor then as wiring seems ok??????????????????? really quite annoying,its over fueling that much can just take foot of pedal n drive itself around town un hill too in lancaster like herbie!! :scratch: costing me alot in fuel tho so its not funny anymore :pale: as i dont av a job n av to borrow money so everyone knows how bad it is n keep on at me too sell it
-
my local dealship wanted 50quid for both of these!!!
-
new ride height... old ride height... looked good but just wasnt drivable new camber...
-
well had a nightmare....top bolt fell out,holding the brake caliper on so caliper dropped forward rubbin like a bbitch on the wheel making horrendous noise in middle of town today in heavy traffic so after abit of fettling manage to nip other bolt up tight enough for me to keep on goin then stop tighten it up n carry on etc till i got home.. the wheel... couldnt find another with same thred so used a wheel nut in stead with some thread lock,thread locked all the rest too incase any of the others try'd makin a run for it!! hoovered n cleaned car, shortened boost threadded bar on inlet manifold so goes whoosh abit louder,i no some people think it might sound tacky but i love it straightened rear light on boot lid to line up with on rear quater fitted alpine star sticker on rear window fitted new jvc head unit heres pics of suspension i took off brake line had taken a beating from being on its arse,av to fix that
-
haha yeah SOHCAHTOA i havent heard or used that in years!!! if they'd have told me that it could help u work out negitive camber on a car in school i might av paid more attention!! rather than a ladder lent against a wall...a cars far more interesting! ill remember that then..i'd never have thought of it like that 10points to you for inginuity!
-
ah no worries,nice car that of mr cabbages.follwed it to u.d n went well i was pickin my sister n mates up at kendal college then they realised theyd need their i.d for pubs in barrow n had to drive through town n onto hallgarth over those small hills they call speed bumps to get it,wasnt happy with full load was draggin its arse i used to live in kendal but now in lancaster,in kendal quite abit seeing afew mates u??
-
ah well it seems ok for now ill just see how it goes untill i can afford a proper set up i got -1degree put on front today,looks well and loves the round abouts more than did before!! think that might be something to do with the new shock/springs u gave me n for now its a gud un :cheers:
-
is that the only way to do it? as i dont av 20quid never mind 100 iv allready been gettin grief off everyone for buying parts for my c when my overdrafts ament to be for my bills but i thought bollocks to it haha ah well ill av to see what happens
-
for 4wheel alingment?? i really cant afford it im just wantin it to get it half right for now,the guys at westgate tyres are ok n should sort me out well enough for now...once i get some money earnt again im gonna go to town on the little madam...iv allready got my shopping lust in my head haha
-
yeah we were feeling them bottom out,its squashed my rear caliper brake pipe as its not ran in the guides prpoerly!!!! :brickwall: i kinda wish id not bought the :censored: car n that its only good for fire fodder but i will one day have it running sweet........eventually i got some new springs n shocks off mr mass n gettin them tracked up 2mo the other ones were a right state ill get some pics for u to laugh at :lol:
-
ah right my mate necer told me that,it was only a little bit to lube the emery cloth to get rid of the rust on the caliper piston cheers for the tip tho ill be carefull in future
-
yeah i was trying to play with those bolts today,u can buy a camber gauge thats magnetic that u put on yur brake disc n tells u how much theres is,25quid i think...from frost they do some good stuff ok well ill try a degree but i dont have any stupid wheels tho just the standard 15's but will be gettin some in the future! :clap:
-
haha ah well hopefully once iv got a job again n got some money sorted ill get some coilovers for her n get her sorted properly so what u think then kempy,half a degree sound good?? :scratch:
-
haha yeah the front,would the not handle strangly?even tho it must look ace!love the camber just wish i could afford the tyres!!! so about half a degree then??
-
iv done a search and it cam up with this...... well iv got springs n shocks..40mm drop im getting tracking and camber down 2mo but wanting to know whats a good road set up for handling,looks and not too much tyre wear iv got 1.5 degrees on my mini n looks good but will this work on the rado??
-
id be ineterested in some n ill get looking for 88-91 passat connectors too is it just on the headlights i can get the connectors of or is there anything else using those on the car i can cut them off??? might be able to make on even if its not a group buy?? mucho gracias
-
so theres gonn be another? maybe i should email those boys..haha yeah i no its ment to be taken light heartedly just i wouldnt mind actually watchin a decent car movie so why cant they make one and cut the bull?? i do wana see cars drifting,things gettin blown up but theres gotta be a better way yeah was good seeing a ole mustang gettin some loving in that film prob best part as for box offic..theres not really been much else tho..that crank2 looks turd along with that boated that should have sunk and i love u man???i think i would rather av watched the new fast and furious jap crap tho!
-
needed one on the front of mine as one of the pistons had abit of rust on under the rubber dust seal so had to get emery cloth out n make her all smooth n shiney agin n then wound her back with som wd40,works ok now
-
i measured the fluffy black vacum pipe to the ecu from the inlet manifold today and it was 90cm now i know its gotta be exactly a meter so might this be the problem for my over revving?? its starting to do my head in that much i just wana set fire to the thing n call it a day to be honest iv got no money to take to garage yet untill i get a job so any other things i can try looking at that might help would be great folks cheers :salute: