Jump to content

pkradman

Members
  • Content Count

    25
  • Joined

Community Reputation

0 Neutral

About pkradman

  • Rank
    Newbie

Converted

  • Location
    northampton

Converted

  • Interests
    old school bmx .. and my g60`s

Converted

  • Occupation
    bricklayer
  1. just to back up whats been said .. ive took it to my local gearbox centre just happens the owner is a bit of a vw nut , he also said the same the gear box oil will makes the world of difference , plus the idle control valve is playing (unstable revs) up along with a lil bulge in the clutch slave pipe so im gonna get these sorted first failing that he can rebuild it for 300 .. and no its not ur old nugget rado .. :-)
  2. ok ive recently brought another g60 (nugget) and im trying to keep it alive but it sure is testing me .. my problem the gear box 1st to 2nd has got a crunchwhen pulling of at hig revs its had a brand new clutch fitted now my mechanic is saying the gearbox (syncros) are the problem , so ... im thinking its gonna be easier just to replace the box ?? ive done a bit of home work on gear box codes my question is will a box from a 16v work ok as the ratios seem to be the same , or will it have to be a g60 allocated code ?? please any help would be appreciated ..lee
  3. hi there .. ive just brought another g60 the guy i brought it from said there is a slight bulge in the hose which needed replacing as its effecting the gear change (crunch) mainly from 1st -2nd .. does this sound right or is it the clutch ?? any thought would be appreciated ..thanx lee
  4. i ive just brought another g60 and on the way home i noticed the temp gauge sat at just under 70 (wot should the gauge sit at ) and the heater was blowing luke warm .. i mentioned this to seller when i got home he said the heater was working fine .. previous to this i recall saying its just had a new water pump .. could it be the thermostat/ air lock ?? please dont say its the matrix.. any thoughts would be appreciated ..lee
  5. whats the number on the momo boss should be 8010 or 8014 me thinks ..lmk thanx lee (if u still have it that is )
  6. ok cool .. turns out he seller hasnt found the adaptors to 4x100 id have to get the adaptors made :(
  7. hi .. can anyone tell me if these bbs rs will work on my 60 corrado with the adaptors mentioned ? any help would be appreciated ,, i have coilovers already fitted not sure if any arch work would be req and what tyres would work ..lmk thanx lee http://www.ebay.co.uk/itm/121004969132?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
  8. pkradman

    bbs rs help

    ok i have coilovers already fitted i may take a punt on this one ;0
  9. pkradman

    bbs rs help

    hi can anyone tell me if these would fit on my g60 rado without any arch work and rubbing ive been searching for some "16s for a while now :( http://www.ebay.co.uk/itm/180851099892?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_500wt_1204
  10. pkradman

    bbs rs 16s 4x100

    im sure i join a big list but here goes ... looking for the above re-drill is fine as long as they are compatible for my g60 raddo ...lmk thanx lee
  11. thought as much .. just wanted to hear it from u guys .. my quest! goes on !!! thanx guys
  12. hi can anyone tell me if these will work on my raddo once the 4x100 adaptors are in place .. ie will i be able to go round corners ..lol http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320780547895#ht_500wt_1204
  13. well sticking out too far .. they look ok on that mk2
  14. does anyone know if these will fit on my raddo g60 without lookin too carlos fandango stylee and dont wann get into one with arch work , ideally i dont want the rims sticking out over the arches i have some fk coilovers aleady fitted .. its just these are a long way from me and dont wann waste me time and cash http://cgi.ebay.co.uk/BBS-RS-16-Alloy-wheels-5x114-3-and-4x100-jap-euro-/230646436859?pt=UK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET&hash=item35b39953fb
×
×
  • Create New...