Sam.l

A desparate bump!! Any colour body panels?

Sorry to keep bangin' on, but wondering whether you have come to any conclusion with G60 CS yet? Thanks :-)

Hi rich, did you get my PM regarding payment for the knock sensor? Please get in touch! Thanks, Sam.

Easiest way to tell an early and late wing is at the front of the arch of the wing, if it falls flush with the front bumper it's late, and if it is slightly narrower it early :-)

Bump!

Were there any body panels left of this car?

Bumpety bump!

Any word?? Thanks.

Thanks again rodmax, still trying to hold out as I just don't have the spare time at the mo to get to where you are! I havnt forgotten though, will be in touch should I have no luck. Seems to be that way at the moment. :-( not even any headlights???

Did the outer sunroof seal go in the end? Just got back from being away!

What I've done so far has definitely made a difference. Just want to carry on and make sure everything is tip-top now.

Car is running a lot better, think the small rubber hose to the FPR seems to have been the main culprit! Just having a look behind the inlet manifold and the other braided hoses that come from that area, going into the hose-work for the carbon canister a hose from that is quite perished on the manifold end. Could this cause running problems or is this directly linked to the carbon canister therefore not doing that much anymore as the car is over 160,000 miles now. Any advice appreciated, thanks.

Anyone? Thanks.

Hi, do you still have both grilles left? Would you accept £35 posted for both? Thanks

Could you post a pic of the outer sunroof seal please? Thanks.

Bump :-)

Do you have any of these items please? - Late drivers side front wing - Early bonnet - Passenger side door (preferably with working window motor?) - late headlights Thanks, Sam. ---------- Post added at 2:23 PM ---------- Previous post was at 2:21 PM ---------- Do you have any of these items please? - Late drivers side front wing - Early bonnet - Passenger side door (preferably with working window motor?) - late headlights Thanks, Sam.

Great, thanks for the heads up Yandards. Will await your reply!

Hi yandards, have you had any word from G60 CS yet? Thanks.

Bump again :-)

Hi mate, would you accept £180 posted for the swg twin inlet? Thanks.

Hi rich, did you get my PM with regard to payment for the knock sensor? Thanks a lot. Sam.

Starting to cure the problems, but still not 100% happy. Changed the fuel pump relay, fuel filter and have recently realised a gaping crack in the small rubber pipe off the left hand side of the inlet manifold going to the for (I think!) could explain the fuelling issues. Next up, I pulled out e vac hose from the ecu to inlet mani and for starters it's about 5cm too short to be a full 1m long, as well as it being quite perished near the inlet end. I am correct in thinking this hose has to be exactly 1m long? Off to halfords in the hope that they have some hose, otherwise will have to wait another day. Any other advice or suggestions would be much appreciated! Thanks again peeps. ---------- Post added at 1:16 PM ---------- Previous post was at 1:15 PM ---------- That was supposed to say, the small rubber hose off the left hand side of the inlet mani to the FPR! :-) iPad autocorrect :-/

Bump :-)

Anyone have any of these items?? Need 'em asap to get my C back on the road! Thanks in advance.