Graphite

No problem, can you PM me your postal address? Troy.

I don't know if they're the cupra R calipers, I haven't checked the part number. The discs that were on the car look bigger than 305, I think they're 312. I am selling these at a cheaper price as the cosmetic condition is poor. I think the pictures make them look better than they are.

Haha, why not buy it then? [emoji23]

I have a G60 ECU with wiring harness. The ECU has a standard chip. I re wrapped all the loom in cloth tape, so it's like new. Perfect for a project or conversion. £150

Hi Andrew, Sorry I had better clarify the post a bit more. In regards to G60 fitment I am referring to the offset of the disk to the calliper and its carrier bracket. These will not fit under 15" wheels. These were fitted under 18" wheels that were on the car when I purchased, hence the removal as I went to 16" wheels. You could have a custom disk made but I'm still not sure if you'll get them to work with 15's I do have a modified mk3 golf calliper and carrier to fit 288mm brakes to fit a G60 though, these 'should' fit under 15" wheels but I haven't got a wheel to guarantee. Troy.

Blasted and powder coated black. Bend free and all tabs have good threads for the securing bolts. £30 plus postage.

Shot blasted and powder coated in gloss black. Will come with the two brackets that go through the bushes which have had the same treatment. £85 plus postage. I also have a radiator support panel but I got slightly bent in the coating process and has holes cut into it where oil cooler hoses were passed through. £45 plus postage (due to bent condition)

Lightened flywheel for a G60. Timing marks are still present and weighs approx 3kg less than stock. £95 plus postage.

Used brembo four pot callipers. In need to a cosmetic refurb but in good working order. Comes with mounting brackets and discs to use as patterns. They were fitted to a G60 so can guarantee figment on this setup. £100 plus postage.

I can't believe I'm doing this but they are of no use to me on my build. I am selling my beloved Stern wheels. I recently refurbished these with grey powder coated centres and had the dishes re-polished. They are 5x114.3 fitment but I will provide 20mm PCD adapters to 5x100 in the sale price. The only thing I didn't re-finish was the centre caps which I have but I could get them done on behalf of the buyer included in the price. Fitted with Toyo Proxes that are 250 miles old. These are very rare wheels and look great on a corrado. £800 Collection only but I'm willing to travel if you throw me diesel money.

I have a set of four Bosch injectors part number: 0280150967 Perfect for a 16v G60 or similar. £75 + postage.

Yes it does [emoji1303] good luck with your search. Troy.

Do you have an early or late style dashboard. If it is early I have one for sale.

Cool. I'll pm you now.

Yes I believe I do. They were tested on an asnu rig. I can get that and send you a copy of it tomorrow morning, however I am away from mid day tomorrow and will not be back until Wednesday.

Sorry 85 is the best price I can offer the refurb was the best part of the price so essentially injectors are free.

I have a set of four that have been refurbished, 85 quid posted.

That's a common name for the connector that uses the terminal you have posted a picture of. They can be found in many of the connectors on the corrado, but the two pin plug (as used on fuel injectors for our cars) are called EV1 Timer plugs https://www.google.co.uk/search?q=ev1+timer+plug+pins&client=safari&hl=en-gb&biw=375&bih=559&prmd=sivn&source=lnms&sa=X&ved=0ahUKEwiE37vvq8TPAhURgx4KHdMsAr4Q_AUIBCgA&dpr=2

Ev1 timer plug pins.

Cool, thanks for the update. Sorry I've been busy. Jaybo pm me [emoji1303]

Pm me a post code and I'll get back to you with a postage cost.

I have one in a car I'm breaking.

EDL - Not English Defense League - Electronic Diff Lock.

So with all unnecessary brackets removed the car is looking very different. All The seam welding is now complete. And we're looking to move on to the next phase of work. I have an enquiry in with ATL for the fuel cell and Corbeau for the seat, waiting to hear what prices they'll give me. Here is the box with all the scrap brackets. I'm going to weigh this pretty soon, it's more weight than you would think, probably around 10-15 kilos.

I can post it no problem. They were 120 so how's 60 plus postage given the damage?