mrginge

I replaced the oil cooler seals and the rubber pipes only a few days ago without removing the whole front end, i had the bumper off though which was helpful as I could see around the side of the radiator to get an idea of where everything is and could reach under the car. it would be easier if you have access to ramps to do the job standing up underneath but if needs must, since you are likely to drain the coolant system is wrestle the fan/rad out of the way first you ought to be able to do the job from above.

Sorted. Just making sure I wasn't jumping any queue. Thanks.

price posted for the tanks?

I shall take it if still available.

OK, what is the price of the ISV posted? I will leave the pipe. Thanks.

Cool, Have you fitted the pipe ever as i had a bonrath one and it was useless in my Corrado. Also the ISV, what engine is it for, cheers.

Pic of Ali vr6 pipe please and what engine is the isv for? Thanks.

Bump

First wash, not been waxed yet or anything fancy just a quick shampoo to get the bodyshop dust off mainly. I managed to drive from the bodyshop (About 2 miles from my house) home and find out my radiator had split. So i used the one out of my brothers VR6 whilst i waited for new bits to arrive. Whilst checking the leak i found out my secondary waterpump had gone to crap as it sounded like lots of plastic bits being crunched inside it. So after paying the bodyshop bill i had to buy more parts including new tyres all round as i don't want to crash the car now due to cheap/crap tyres so im very skint right now ha Parts fitted this week: Radiator Plastic elbow and seal, Venair pipes on the oil cooler (I didn't fit them when i did the others due to access) Oil temp sensor Rad fan belt All 3 engine mounts Aux waterpump Just for reference my bay is still dirty from the bodyshop but its shows the change over the last few years - Less blue! As for the Corbeau seats, they sit very nice in there - Not to wide. So i just need to buy the correct frames for them.

As title, not sure of any differences but listed my cars details anyway. After a pair as i have split mine. Thanks

Won't be able to get that anytime soon as I have buried the frame under loads of stuff in the garage.

No problem, thanks.

Bought these as i thought they would fit my late Corrado but they don't. The drivers side had a little use in my friends Seat Ibiza but the passenger seat was never fitted. Includes the relevant bolts, washers etc for securing your seats. So the frames are for Corbeau seats but I'm 99% sure that Cobra and Sparco seats will fit also. They are the sliding type - Not tilting. Model: COR-CS51304 (Right side) and COR-CS51303 (Left side) Frames to suit (According to Google): - Polo 6N and 6N2 - Seat Ibiza 93>00 - Seat Cordoba 94> - Seat Toledo 98> - Golf Mk3 - Vento Price: £195ono - They were £240 new but willing to listen to offers. Collection from Stroud, Gloucestershire. Postage could be available but it probably wont be quick due to my work hours.

http://www.ebay.co.uk/itm/Passat-Door-Handle-Conversion-VW-Corrado-G60-VR6-16V-2L-/170590691722?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27b7ff618a

I took a little material off my 312 calipers and they have fitted no problem under my 16" Azev A's and BBS RX2's. Look the nuts as well as the brakes fill the wheels really nice.

Seems like a fair price, my full respray is closer to 2.5k. Some places quote £200 a panel.

I have had no issues with my Sachs kit, and they only cost £60 roughly on car parts 4 less. I don't think you need uprated ones till a VR is charged in some way.

Thanks.

I could do with the rears as I was thinking of putting some speakers in mine so a set already damaged is cool. If the buyer for the fronts doesn't want the rears could you throw them in a bin bag and I pay for postage? Cheers.

Inpro did all clear crystal rear lights, look great with lamix style red tint.

That price is good for me. Pm me PayPal address. Thanks.

How much are you after? I suppose whilst we are having dry weather I can wait.

As title, guessing loads should be available as people change to Lupo/tt wipers. Thanks.

Not sure tbh. If they don't they go back on ebay no issues as i didn't pay much for them. They don't seem much wider then a standard seat and the base or by the shoulders, I think they look wider in the picture i posted. They have been mightly comfy in my living room playing Gran Turismo.

Interested in heater controls if still available.