hawwy

what if i redrill wheels to 5x100

yes, so what will they be running? the front are 7 j , they are et36 , the back are 9j so i would have been changed? the are 5x112 , and the are rm003 edition whites, quite rare it says 7jx15h2 rm003 et36 how do you go about getting hubs drilled to 5x112?

right now im running 25mm adaptors, will 15mm adaptors do the trick?

I don't want it proper under arches, I want it so like if I go on a bump or something then the top of the tyrewall will go under arch and not hit it

the spacers i got on right now are like 30 mm

9x15 inch - 5x112 - ET 36 they are 195 45 15 atm so : http://www.tyrestretch.com/9_195_45_R15/9_195_45_15+%282%29.jpg.php what if i get 195 55 15? :http://www.tyrestretch.com/9_195_55_R15/9_195_55_R15.jpg.php

front ones are 7 j and im going to put http://www.tyrestretch.com/7_165_45_R15/7_165_45_R15.jpg.php that size tyres, it not the wheels, i think its because of adaptors that they are looking that wide. will a 165 45/50 15 tyre do it for the back rims the 9j?

hi i just fittted my bbs rm to my corrado vr, now the problem is there too out of the arches, tyre wont get under arches at all when it lower. the are 9J x 5 , the tyres i have got on right now are 195 45 15, and the stretch isnt that much ,, so what do i do now, do i tyres with more of a stretch? if so what size, i looked on tyrestretch.com but cant find anything that looks right. i thing i need a load of stretch? heres some pictures. pictures say a thousand words. Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us thank you

Check battery leads

can you please tell me what bolts i will be needing? heres the adaptors Uploaded with ImageShack.us here the hole to bolt to hub, what bolt needed? Uploaded with ImageShack.us and heres the wheels what bolts are needed? they are call bbs RM Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us thank you

so on the adaptor the bigger hole is where i bolt it to hub , and the threaded hole is what i bolt wheel on to?

yes ive got the wheels they are bbs wheels i understand that , but i dont have bolts to bolt adaptors to hub, what type of bolts are required

hi ive got some wheels with wheel adaptors, to change from 5x112 to 5x100 i was wondering how do i use them? what kind of bolts do i need etc? cheers

what you mean by perch ?

is it possible to twist the purple thing by hand?

on my vr c ht lead the metal bit, the one bottom right just that lead had oil on it , and it had some on the plug, just towards the top of the plug lead side just below the bolt,why that. its only the one plug lead with had it/

anybody in west yorkshire that can roll arches? cheers

i just got some kwv2, so to adjust there an allen bolt on the purple ring ,do i open that then twist purple ring with c spanner?

your not the only one

60 for steering wheel? mint condition

have u psted my lights

i dont understand whats youre trying to say, the leads are faulty?

sorry to hijack thread again but my vr when i remove the lead 2nd row 1st lead coil pack side car starts shaking and goes off? whats that faulty the coil or lead? also one of my plugs were black , and the rest are all in good nick

thats what i thought but i got it changed

VCDS-Lite Version: Release 1.1 Saturday, 18 June 2011, 22:22:24. Chassis Type: 50 - VW Corrado Scan: 01,02,03,15,25 ------------------------------------------------------------------------------- Address 01: Engine Labels: 021-906-258.LBL Controller: 021 906 258 AG Component: MOTOR PMC 1 Coding: 0261203109 Shop #: 1267357531 VCID: 59C50E67D017 6 Faults Found: 00527 - Intake Manifold Temperature Sensor (G72) 30-00 - Open or Short to Plus 00537 - Shareware Version. To Decode all DTCs 08-10 - Please Register/Activate - Intermittent 00553 - Shareware Version. To Decode all DTCs 29-10 - Please Register/Activate - Intermittent 00533 - Idle Speed Regulation 10-10 - Adaptation Limit Not Reached - Intermittent 00525 - Shareware Version. To Decode all DTCs 29-00 - Please Register/Activate 00513 - Shareware Version. To Decode all DTCs 03-00 - Please Register/Activate Readiness: N/A i have just put a new lambda sensor in yesterday i have got the codes check they are: oxygen sensor control idle air contol regulation mass air flow sensor o2 sensor voltage low what do the above mean , i dont know why o2 sensors coming up as i just changed lambda anybody help me, as cars giving lots of trouble