Wesleyvr6

Thanks everyone for all your inputs, going to have another bash tomorrow night and hopefully with success this time, only problem I have is I can't really drive the car as its not mot'd or taxed yet! Just the brakes to sort then that willbe done! I will keep you all updated. Thanks again Wes

Would ou recommend I use the eazibleed pro bit of kit then as this uses suction rather than pressure? Thanks again for all your help! I will get there eventually I promised myself haha!

Thanks for your info buddy. Yes once but going to try again tomorrow no just the old fashioned way, I think my friend has one of these, I'll see if I can get hold of it.

See here Andy. http://the-corrado.net/showthread.php?63469-Major-trouble-bleeding-brakes!

I will attend if I can get the brake problem sorted on mine as I only 15mins away. If not I may just come up in the Audi for some advice??

I think it may of done yes, we've been trying again all night and still no joy! I'm slowly loosing it with them now as I've spent weeks and lots of cash bringing this car back to like new! Just need the brakes sorted then it's not time and a drive in the beast after owning it for nearly 10 months!

Now I have everything on the abs side running without any faults I started to bleed the brakes! Me and my friend(Audi mechanic) have tried 4 times now to bleed the brakes! The problem we have is the pedal seems fine after pumping the brakes once, but the next time you come to press the brake they seem to go to the floor! We definitely have no leaks and have pumped at least 1.5 litres through each caliper! We have also bled the abs pump! Where are we going wrong? Everything worked fine before I did the 312 upgrade and new rear mk4 calipers? I know a lot of fluid may have leaked out of the system as we were upgrading everything over a couple of days! Thanks in advance

Ok thanks for all the replies everyone. Now I have everything on the abs side running I started to bleed the brakes! Me and my friend(Audi mechanic) have tried 4 times now to bleed the brakes! The problem we have is the pedal seems fine after pumping the brakes once, but the next time you come to press the brake they seem to go to the floor! We definitely have no leaks and have pumped at least 1.5 litres through each caliper! We have also bled the abs pump! Where are we going wrong? Everything worked fine before I did the 312 upgrade and new rear mk4 calipers? I know a lot of fluid may have leaked out of the system as we were upgrading everything over a couple of days!

There's a set on eBay at present!

Is it only one of the 3 relays that is supposed to click when the ignition is switched on?

Good afternoon all, after overhauling the complete brake setup on my C I have now come to bleed the brakes but the abs pump doesn't seem to work when I put the ignition on! I have manually wired up the abs pump and it runs as it should, I have pulled out the 3 relays behind the glovebox and tested them all and they all work fine, one of them clicks when the ignition is turned on, is there anything else I an check as to why the pump doesn't come on? There is no pulse in the pedal now when the ignition is turned on either??

Has anyone used the tt flexi pipes with this setup too, mine seem a little tight on full lock??

That was quick! Thanks pal ---------- Post added at 09:16 PM ---------- Previous post was at 09:12 PM ---------- Also I've used the flexi hoses off the tt but these seem slightly tight on full lock, has anyone else used these?

Evening all, during my restoration project of my 95 Vr I have upgraded the front brakes to 312, I have used mk4 golf calipers and tt disks and carriers, I've noticed after installing them all the the disk splash guards are touching the back of the disk!! Have I done something wrong or do the splash guards need o be removed? Thanks

Thanks Pete, what's an Fcm? Will order a new black temp switch and see if that fixes the problem.

Hi all, the fans on my 95 vr6 stay on constantly, has anyone any idea which sensor it is likely to be that needs changing? Many thanks

Hi all I have a thermostat housing with the three sensors on it, one of the sensors seems to of lost the metal clip that holds it on! Does anyone have an old loom with one on?? Thanks Wes

You both have PM thanks.

In Stockport mate, how much you want for them and where are you based? Thanks Wes

Hi Bill it's only the drivers side I need really, I don't mind paying for both it's it's not ridiculously expensive! Thanks Wes

Thanks Bill, I'm in Manchester where are you based? ---------- Post added at 10:02 PM ---------- Previous post was at 10:01 PM ---------- Sorry just seen your in Scotland! If I pay the postage would you be willing to post for me? Thanks Wes

Need a front o/s caliper for my 95 vr6, as I have snapped the bleed nipple on mine! Thanks Wes

http://www.veedubmachine.co.uk/index.php?main_page=product_info&cPath=101_103&products_id=86 Try these.

PM sent

Got one now off another member, many thanks