Jay2 0 Posted October 1, 2006 I am in the middle of re-building my boot after some welding and trying to tidy up all the ice bits from the previous owners handywork. :shock: Do I need to strenthen the rear-parcel shelf with a length of MDF to add support for the 6x9 speakers? Or will this just end up adding more weight to the shelf and moving the strain to the supports and straps? Advice urgently needed so I can put the car back together again. Cheers. Quote Share this post Link to post Share on other sites
Corradokid135 0 Posted October 3, 2006 It should be just fine with only using the rear parcel shelf and no mdf. 6x9's arent to heavy ;) Quote Share this post Link to post Share on other sites
g60greeny 0 Posted October 3, 2006 as your parcelshelf already been cut for 6x9s?what colour is it? Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted October 3, 2006 As long as its in good condition (no doubt it is). Best bet though is to get a stealth shelf :D Quote Share this post Link to post Share on other sites
Phil K 0 Posted October 4, 2006 Mine isn't strengthened and is fine tbh Quote Share this post Link to post Share on other sites
DEL VR6 0 Posted October 4, 2006 I would have thought adding MDF is just gonna add uneccesary weight to it. If you arent having a stealth shelf, I would just mount them straight on. Take your time cutting it tho! Quote Share this post Link to post Share on other sites
slats 0 Posted October 4, 2006 put a sub in, much better IMO Quote Share this post Link to post Share on other sites
Foggystorm 0 Posted October 4, 2006 or get one of these: http://www.auto-acoustics.co.uk/index.a ... ductid=178 Quote Share this post Link to post Share on other sites
Jay2 0 Posted October 4, 2006 New shelf is black and already had the holes cut in it. Bought another one, as the old one had the holes cut out towards the back of the shelf, which had broken the rear parcel shelf supports, which I've also replaced. Gone with a bit of MDF and see how I get on. Thanks for all the advice. Stealth shelf looks a good upgrade. Have you got one fitted? Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted October 4, 2006 Well worth the money! Seems a bargain at £50 Quote Share this post Link to post Share on other sites
Foggystorm 0 Posted October 4, 2006 yeah I have one fitted in my C, although I recovered it so that it matched my interior colour Quote Share this post Link to post Share on other sites
-Neil- 0 Posted October 8, 2006 i have a black shelf with 6x9's in you can have, i dont want it! Quote Share this post Link to post Share on other sites
mattnorgrove 0 Posted October 10, 2006 Mines fine with no strengthening MDF.... Quote Share this post Link to post Share on other sites
vdubjb 0 Posted October 15, 2006 dont put speakers in that location. They are going to be too close togther to sound good. Use the 6 oem locations and add a sub. If anything, you may want to add small tweeters to the mirror triangles up front. I crnge whenever I see someone bastardise the parcel trays. impossible to find as is... Quote Share this post Link to post Share on other sites
jonnyboyo 0 Posted October 23, 2006 I would always save the oem shelf if it hadn't been butchered just to preserve it. Best solution is a stealth shelf. Essential for sound quality as they help improve the bass extention of the speakers, acting as a baffle. But most importantly, they hide your 6x9's from thieving little s**ts, coz they're screwed underneath out of sight and the shelf is made to look like the original. I just got a 3 1/4 inch thick piece of MDF from a builders merchants for £8, drew round the oem shelf, cut it out with a jigsaw, smoothed edges with sandpaper then covered with acoustic cloth bought from a car hi-fi shop for £10.....total cost £18 and really makes a difference to the bass the speakers punt out. The shelf is VERY heavy, as are the 6x9's coz they have mahoosive magnets but i have had no probs with the shelf supoorts creaking or cracking. The only downside is that i cannot use the shelf straps as the shelf is to heavy. Quote Share this post Link to post Share on other sites
Jay2 0 Posted October 23, 2006 Got past the problem of the parcel straps by using steel wire which has a plastic coating, so doesn't look too industrial. Couple of washers to stop it pulling through the shelf holes in the corner and job sorted. Quote Share this post Link to post Share on other sites