h84tyg 0 Posted January 30, 2007 what injectors can be fitted to the g60 engine? cheers Quote Share this post Link to post Share on other sites
flusted 0 Posted January 30, 2007 red tops found in mustangs and i believe saab turbos are needed for over 200bhp Quote Share this post Link to post Share on other sites
g60bv 0 Posted January 30, 2007 or motorsport greys. 325cc Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted January 30, 2007 It depends what sort of power you are after and is dependent on the amount of fuel required Quote Share this post Link to post Share on other sites
2_Door_fun 0 Posted January 30, 2007 red tops found in mustangs and i believe saab turbos are needed for over 200bhp Really Saab Turbo's :D I've had three and I have a set of injectors in the shed!!!! Al were 1994 / 95 2litre se turbos.s very nice car. Quote Share this post Link to post Share on other sites
steveo29 0 Posted January 31, 2007 ebay.com search for 30lb ,#30, red inj, mustang, ford motorsport....you'l get a set of 8 and you can sell the rest to help pay for yours Quote Share this post Link to post Share on other sites
JMC 0 Posted January 31, 2007 You don't always need uprated injectors - I'm running about 210bhp at the fly on original injectors. Depends on how much power you need and what other mods you have. Quote Share this post Link to post Share on other sites
Neil VR6 0 Posted January 31, 2007 You don't always need uprated injectors - I'm running about 210bhp at the fly on original injectors. Depends on how much power you need and what other mods you have. Absolutely. If the car fuels up enough under load and the AFR doesn’t spike (signifying running too high a duty cycle) there’s no need top uprate the injectors Quote Share this post Link to post Share on other sites
flusted 0 Posted January 31, 2007 it mostly depends on pulley size. You cant really run 65mm pulley without redtops Quote Share this post Link to post Share on other sites
JMC 0 Posted January 31, 2007 Err, I'm running a 65mm and flowed head on mine with green tops, so not necessarily true. Quote Share this post Link to post Share on other sites
flusted 0 Posted January 31, 2007 Ok il rephrase that, i was advised to use red tops :oops: Quote Share this post Link to post Share on other sites
G60SC_Stoney 0 Posted January 31, 2007 i was running 65mm pulley and on std injectors too. Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted January 31, 2007 IAW/weber 4 hole injectors robbed off a L.delta integrale(ca.389cc) also the injectors fitted to the fiat coupe 16v 2.0 turbo,exellent spray pattern and all importantly,the're all high imp. jobbies. Quote Share this post Link to post Share on other sites
2_Door_fun 0 Posted February 28, 2007 red tops found in mustangs and i believe saab turbos are needed for over 200bhp Dug out my Saab red injectors tonight. They come from a Saab 9000 Aero 2.3 mitsubishi TD09 Turbocharged model. Its a real monster of a car. 1996 model I think. Bosch part number: 0280 150 431 Flow rated: 352cc/min @ 3.0bar High impendence 12ohms I think. just had a nosey around my old saab forum. Pleanty of tech knowledge over there. these reds any god for our VW's? Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted February 28, 2007 thats what im using,used 2 set of four got both sets off e-bay for 60quid. http://cgi.ebay.co.uk/Bosch-red-top-inj ... 0087102164 Quote Share this post Link to post Share on other sites
2_Door_fun 0 Posted February 28, 2007 really thats cool. So i have a stage 4 charger, 68 pulley, frontmounted IC, 5.5 SNS chip. Is it worth fitting em. how do they compare to standard G60 Injectors? What are the No's these? Quote Share this post Link to post Share on other sites
CorradoVR6-Turbo 0 Posted February 28, 2007 I have a VR6 so am unsure on what works well with the G60. Quote Share this post Link to post Share on other sites
flusted 0 Posted March 1, 2007 The chip will need re-writing to suit tho Quote Share this post Link to post Share on other sites
