Corrado running Ninja ZX7R carbs

[Blaklabel313 0]

Been doing this project for a little while now but as its all up and running thought i would post the pics, let us know what you think then peeps. cheers for looking!!

 

 

 

 

 

 

 

 

 

 

 

[boost monkey 0]

That looks like fun!

 

Do those carbs have the slide venturis? Also, what is bottom end torque like, that manifold looks pretty short!

[Blaklabel313 0]

no worse feel-wise than it was with the injection to be honest but the mid range...3k plus is realy beefy it feels like theres more grip anyway.....(i just love the noise and constant popping from the exhaust on throttle release)

[junkie 0]

Quality stuff me like :notworthy:

[boost monkey 0]

What size are the plates in them?

[Blaklabel313 0]

i cant remember all the techy bits to be honest....the outlet end was 38mm on each but i cant remember what the venturi gaps were.. :cuckoo: it worked out to allow enough air when i had the original calculations done and the jets are correctly sized so it all seems ok...!(touch wood)

[Philuk 0]

sweet, gotta love the sound of bike carbs :D

did you do the conversion yourself or get someone else to do it for you? - what engine is it you have

you car is looking well also 8)

[Blaklabel313 0]

had the manifold made and the jetting done by boggs but all the mechanics etc i did myself. The engine is a 2.0l 16v 9a lump. the original lump was the same but went bang so i put another one in and thats when i decided to convert it, ive still got the original which will be refurbed and modified and put back in at a later date (with carbs of course)

[Riley 0]

Superb mate :D Great to see an n/a corrado on carbs of some sort...Not enough of them imo!

 

Can we get some video footage of it? :D

 

Neil.

[Philuk 0]

where you from, to goto boggies you either must love there work or live near by. im from scarborough, havent seen you about! :D

[Blaklabel313 0]

ill sort out a vid in due course but aint had the time yet.....

 

i live in the midlands....sent the carbs in the post to boggs and they did the rest and sent them back.

[Philuk 0]

ahh right makes sense. kinda shows they must be some of the best at it in the business, shame you didnt come up, they got a mint grass track micra with 2.0 red top in it. its a 3 speed and is obviously on carbs. wish i could og see it on the tracks bet its mint to watch!

[Blaklabel313 0]

i might take a trip over to them at some point and see what they can do for me fabrication wise....i quite fancy some custom trumpets for it !!

[Blaklabel313 0]

heres a little vid i made of the motor.

 

[n3p 3]

Whats the bonnet clearance like? You reckon it would all fit under an early one? (-18mm IIRC)

[boost monkey 0]

Sounds good matey! Do like the induction noise :salute:

[Blaklabel313 0]

Whats the bonnet clearance like? You reckon it would all fit under an early one? (-18mm IIRC)

 

depends on what bike carbs you use...and how long your intake manifold is made.

[Blaklabel313 0]

little bit of custom work completed on the bike carb conversion. A polished wiring box cover and a cover/scoop for the carbs to hide the rubber trumpets. What you think then peeps??

 

 

 

[rolex 0]

like Riley said, not enough N/A s out there.

Great work, any thing else done? :salute: