Alty 10 Posted November 6, 2013 Hi, What's total with oem connectors, also I'm in Salisbury if this is local to you now ? Thanks Scott Quote Share this post Link to post Share on other sites
VR6 Gar 10 Posted November 19, 2013 Hi, how much are these? Cheers. Quote Share this post Link to post Share on other sites
Alty 10 Posted November 20, 2013 Hi, What's total with oem connectors, also I'm in Salisbury if this is local to you now ? Thanks Scott Are these still going? Also oem connectors not essential . Quote Share this post Link to post Share on other sites
Alty 10 Posted November 20, 2013 Hi, What's total with oem connectors, also I'm in Salisbury if this is local to you now ? Thanks Scott Are these still going? Also oem connectors not essential . Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted November 25, 2013 Hi all. Sorry for delay. Been off grid for a few weeks. I'll PM you all later on. Looms are available but I have no OEM plugs. Zak Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted December 4, 2013 Have sent PM's out, if I missed you please get in touch. I'm at home now for a few weeks so have some time to make looms Regards Zak Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted January 25, 2014 Have a couple of PM's about looms and will be home in a few days to take an order if there is any other interest? Thanks Zak Quote Share this post Link to post Share on other sites
vagstuff 13 Posted January 26, 2014 Good Morning Zak, First of all, I appreciate all that you've done with the R&D etc to develop this [now famed] loom upgrade, as well as to keep making & supplying them, for Members' benefit == :salute: Secondly, I'd like one, please. and could I just clarify a couple of things : 1] I'm aware of the mini-debate within this helpful thread about spades vs OEM connectors, and I take the point you make about the spades forming a perfectly good connection... ... I happen to have a spare set of OEM connectors with protruding wiring so I'm fancying that mating those respective protruding wires onto your loom's wiring with heat-shrink connectors would be an ideal combination - am I right ? 2] is the price still £56 including P&P? I seem to recall having read £50 + £6 P&P in the thread... 3] I'm sure it's stated within the thread what the postage method is, but without me going back through it all can I just check which service it is, please ? I'd like it to come via an insured & trackable service and if that's not already part of the £56 price then I'm happy to make the total up to £60 for you for an insured & trackable service... if you need a bit more than £60 let me know Could you send me a PM with the payment details, please? I'm guessing it's PayPal, and I'm quite happy to send that as a Gift payment so that you don't incur any deductions at your end. Regards, Thanks & Appreciation, Robert Quote Share this post Link to post Share on other sites
vagstuff 13 Posted January 26, 2014 Good Morning Zak, First of all, I appreciate all that you've done with the R&D etc to develop this [now famed] loom upgrade, as well as to keep making & supplying them, for Members' benefit == :salute: Secondly, I'd like one, please. and could I just clarify a couple of things : 1] I'm aware of the mini-debate within this helpful thread about spades vs OEM connectors, and I take the point you make about the spades forming a perfectly good connection... ... I happen to have a spare set of OEM connectors with protruding wiring so I'm fancying that mating those respective protruding wires onto your loom's wiring with heat-shrink connectors would be an ideal combination - am I right ? 2] is the price still £56 including P&P? I seem to recall having read £50 + £6 P&P in the thread... 3] I'm sure it's stated within the thread what the postage method is, but without me going back through it all can I just check which service it is, please ? I'd like it to come via an insured & trackable service and if that's not already part of the £56 price then I'm happy to make the total up to £60 for you for an insured & trackable service... if you need a bit more than £60 let me know Could you send me a PM with the payment details, please? I'm guessing it's PayPal, and I'm quite happy to send that as a Gift payment so that you don't incur any deductions at your end. Regards, Thanks & Appreciation, Robert Quote Share this post Link to post Share on other sites
vagstuff 13 Posted January 26, 2014 Apologies for the double post... at the first 'submit post' I got the "Error" message screen c/w 'the Arse', and assumed it hadn't worked, so I did it again and now find that it had worked 1st time round... Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted May 1, 2014 Robert you have PM. Life back to normal and looking for a Corrado again. Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted October 28, 2014 Hi all, I have been asked if I can do a loom for someone (not that I done one for ages) so I will take this 0pportunity to ask if anybody else would like one while I am at it? Thanks Zak Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted October 29, 2014 Hello Zak Its been while since ive seen you on here - hows tricks? hope your well. I have 2 of your looms m8, both the 3 relay versions, & one of the relays popped on mine a few weeks ago. I replaced all 3 as i didnt have time to figure which was dipped/sidelights/main beam etc are you able to tell me which one is which so i can make a note of it pls? Thanks muchly Quote Share this post Link to post Share on other sites
Ninjasean2005 10 Posted October 29, 2014 I would be interested in a uprated headlight loom depending on price. Are they all the same? As I would be fitting it to a 1991 G60. Quote Share this post Link to post Share on other sites
Hassan. 10 Posted October 29, 2014 Hi Zak, I would be interested in an uprated headlight loom for a 2.0 16V please? Thanks Quote Share this post Link to post Share on other sites
Ninjasean2005 10 Posted December 1, 2014 Are these going to be made available again anytime soon as my lights seemed really dim tonight Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted July 14, 2015 Hi all, Sorry not been on here for while, a new job has taken me away a lot. I did have a request for a loom from a previous customer who has a new car. I may be able to make a few in August but it will only be a few, as time is very tight. Please email or message me if you would like one. Regards Zak Quote Share this post Link to post Share on other sites
matteusVR6 11 Posted October 17, 2015 Hi Zak, Have you any more of these looms available? I've seen a few on eBay but thought I'd try here first! Cheers 👍 Quote Share this post Link to post Share on other sites
Billzeebub 1 Posted October 17, 2015 I would also be interested in one of these Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted October 19, 2015 guys you might be better dropping Zak a PM as I know he is currently (or was as of 12th Oct) in Austria his post from 14th july was in reference to myself sending him an email on his personal email address I received my loom & will be fitting it this week I am unsure if he would want me giving out his email addy but I can drop him a mail on your behalf asking him to check here if you don't get a reply from him Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted October 20, 2015 FYI i mailed Zak to give him a heads up about your posts Quote Share this post Link to post Share on other sites
matteusVR6 11 Posted October 20, 2015 Nice one, appreciate that thanks! Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted October 21, 2015 Nice one, appreciate that thanks! no problem m8 Zak has replied to my email to say he will log on here & check when he has a free moment Quote Share this post Link to post Share on other sites
KUR2Y 0 Posted October 22, 2015 Thanks for covering my out of the country ass Andy, I did order a few parts in so can knock up a couple of looms over the next couple of weeks. Could you please PM me if you would like one of my 3 relay looms. I guess they would be around £55 posted depending on interest. Many thanks and sorry for the lack of replys Zak Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted October 26, 2015 Thanks for covering my out of the country ass Andy, I did order a few parts in so can knock up a couple of looms over the next couple of weeks. Could you please PM me if you would like one of my 3 relay looms. I guess they would be around £55 posted depending on interest. Many thanks and sorry for the lack of replys Zak no danger Zak I got the new one you made for me fitted in the valver yesterday. A fine bit of work once again, thank you. with addition of the ring xenon max bulbs the light output was awesome last night :D Quote Share this post Link to post Share on other sites
