Hairyarse 10 Posted January 17, 2015 Ah sorry Pete I thought you meant the space was the fuse! Can't help I'm afraid but am sure someone here can 😉 Quote Share this post Link to post Share on other sites
Pete b 10 Posted January 17, 2015 No worrys mate, going to put one on the earth anyway as I noticed the switch gets hot🔥 Quote Share this post Link to post Share on other sites
Hairyarse 10 Posted January 17, 2015 Can't be owt wrong with doing that ;) Quote Share this post Link to post Share on other sites
dma-1984 10 Posted February 18, 2015 Question or two! is this mod required for all corrados whether early or later models? also does upgrading the headlight loom (which i intend to do) relieve the pressure so to speak on the switch wires or does that not matter? my apologies for what may sound like a stupid question or two but im pretty clueless with regards to this stuff so any answers from you informitave folk on here may put my mind at rest. many thanks Quote Share this post Link to post Share on other sites
Wayne2015 10 Posted April 28, 2015 Nice :thumbleft: Never knew about this! :clap: Quote Share this post Link to post Share on other sites
delfinis38 1 Posted April 28, 2015 Nice :thumbleft: Never knew about this! :clap: Dunno if it's in this thread.. Also the glovebox and boot light can be modded. put some heat shrink over the negative arm to stop it shorting. Quote Share this post Link to post Share on other sites
Wayne2015 10 Posted April 28, 2015 Dunno if it's in this thread.. Also the glovebox and boot light can be modded. put some heat shrink over the negative arm to stop it shorting. Which bit??? My glovebox: My boot: My headlight switch wire plastic all melted :shocked!: Quote Share this post Link to post Share on other sites
delfinis38 1 Posted April 28, 2015 http://the-corrado.net/showthread.php?t=53397&highlight=Heat+shrink+boot+light May even be positive arm.. Quote Share this post Link to post Share on other sites
Wayne2015 10 Posted April 28, 2015 http://the-corrado.net/showthread.php?t=53397&highlight=Heat+shrink+boot+light May even be positive arm.. Sorry Dont get :shrug: As not all pictures were shown :( Quote Share this post Link to post Share on other sites
Harrier 1 Posted April 28, 2015 Nice :thumbleft: Never knew about this! :clap: I have just ordered 10 of these fuses so if you (or anyone else) wants one of these give me a shout at Stanford Hall next weekend :) Quote Share this post Link to post Share on other sites
Wayne2015 10 Posted April 28, 2015 I have just ordered 10 of these fuses so if you (or anyone else) wants one of these give me a shout at Stanford Hall next weekend :) I am at Stanford ! :) I still don't know what the modded light looks like - got a PIC? And how much? Quote Share this post Link to post Share on other sites
Harrier 1 Posted April 28, 2015 I am at Stanford ! :) I still don't know what the modded light looks like - got a PIC? And how much? Have fuse for nowt mate :) Quote Share this post Link to post Share on other sites
Wayne2015 10 Posted April 28, 2015 Have fuse for nowt mate :) U an angel! :angel: Let me see one on Sunday - if I can't make one myself then I will take one off u if that's ok!? Quote Share this post Link to post Share on other sites
Hisnibs 10 Posted April 28, 2015 Discovered the fuse the other day Daren, nice work :) Ross Quote Share this post Link to post Share on other sites
Longjon 10 Posted June 26, 2015 Was all ready to do this mod today as most of the dash is out, was initially a little confused when the brown wire was mentioned. Had a good look and it seems a previous owner has removed it, so first thing id to earth the switch then fuse it, so does anyone know where to get the loom connectors from?? Quote Share this post Link to post Share on other sites
Longjon 10 Posted June 29, 2015 OK, managed to get hold of the connectors from these people: http://www.vehicle-wiring-products.eu/section.php/206/1/terminals-to-fit-mouldings Quote Share this post Link to post Share on other sites
