Tristan H 10 Posted September 15, 2011 who or what are TPS? Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted September 16, 2011 Nice details for anyone planning on the conversion. honestly about 2yrs ago, i've done a whole thread with part numbers and pics of the conversion, same for fronts, same for the door card removal (also being asked atm) thought they might of been stickied etc Quote Share this post Link to post Share on other sites
Tristan H 10 Posted October 11, 2011 just found it! still happy with it , after all this time? Quote Share this post Link to post Share on other sites
chrisspencer 10 Posted October 17, 2011 this is a pretty interesting thread. I need to replace my rear calipers, they are looking pretty crusty and have a MOT due.. :( was currently looking for a set of standard rado ones but this is starting to sound like a better option! How difficult of a job is it? I'm still pretty new to the rado world but have replaced brakes of many other cars (incl MK1 golf). Off to look for the other thread talked about above now :) Quote Share this post Link to post Share on other sites
G60Luke 0 Posted October 17, 2011 this is a pretty interesting thread. I need to replace my rear calipers, they are looking pretty crusty and have a MOT due.. :( was currently looking for a set of standard rado ones but this is starting to sound like a better option! How difficult of a job is it? I'm still pretty new to the rado world but have replaced brakes of many other cars (incl MK1 golf). Off to look for the other thread talked about above now :) I did the conversion over the weekend, took me about an hour and i've never done rear brakes before so it really is a simple job. Quote Share this post Link to post Share on other sites
chrisspencer 10 Posted October 18, 2011 Nice one, cheers for that mate, I'll give it a bash Quote Share this post Link to post Share on other sites
shaunVR6 0 Posted October 28, 2011 matt have you the reference for the goodridge hoses you used or name etc thanks shaun Quote Share this post Link to post Share on other sites
8vMatt 1 Posted October 28, 2011 matt have you the reference for the goodridge hoses you used or name etc thanks shaun Sorted for you buddy. Quote Share this post Link to post Share on other sites
shaunVR6 0 Posted October 28, 2011 Thanks matt ur a star Quote Share this post Link to post Share on other sites
dragon green 5 Posted October 28, 2011 (edited) matt have you the reference for the goodridge hoses you used or name etc thanks shaun Its the Mk2-Mk4 conversion set,part no. SVWO5O6-2P loads on e-bay, http://www.ebay.co.uk/itm/VW-Golf-GTi-Mk2-Mk4-Conv-Goodridge-Braided-Brake-Hoses-/250890702210?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a6a404d82 beaten to it Edited October 28, 2011 by dragon green Quote Share this post Link to post Share on other sites
8vMatt 1 Posted October 28, 2011 I advised buying them on Amazon.co.uk, much better prices than ebay. I paid £28 for them. Quote Share this post Link to post Share on other sites
riky123 10 Posted February 23, 2012 Do you have any link from Amazon.co.uk i only found them for about £43 Quote Share this post Link to post Share on other sites
fendervg 33 Posted February 24, 2012 I have thread with all the part numbers - Mk4 callipers aren't that expensive new from VAG for peace of mind - otherwise get a rebuild kit to refresh secondhand ones - the weak point will be the slider pins and boots. You use banjo cables (available from loads of places), standard carriers, standard handbrake cables and standard rear pads. Make sure the brake bias valbe is open when you bleed, and don't connect the handbrake cables until you are finished. Also invest in a calliper rewind tool - otherwise you'll feck up the piston. Quote Share this post Link to post Share on other sites
