Wiper Motor Cover

[JayGT 0]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140518296127&ssPageName=STRK:MEWAX:IT#ht_1075wt_1139

 

Any body seen one of these before? Never knew VW made one and much prefer one of these to a full length scuttle cover.

[dragon green 4]

Yep ,I've got one on mine,Passat part number !

[Yandards 0]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140518296127&ssPageName=STRK:MEWAX:IT#ht_1075wt_1139

 

Any body seen one of these before? Never knew VW made one and much prefer one of these to a full length scuttle cover.

 

I'll have credit for that little find back in early 09, stick a mk 2 Goof scuttle cover on (requires some cutting for the washer fluid tubes and earth strap and some heating up to get it to sit nicely) and you have a very OE looking full scuttle option.

 

Don't buy the ebay item it's more expensive than a new one from VW! Should be around £8 inc VAT for one.

 

The brake cooling duct 'ears' are also less than £5 a piece from the stealers too.

 

Other plastic bits you can also fit are the wishbone leading edge stone deflectors from the '93 to '96 Passat too, the only fit the 4 cylinder cars but again help to keep the amount of crud getting flicked around the by the driveshafts down.

 

Still trying to find a cheap way of fitting a complete undertray but that looks like a scrappy job only.

[v8rumbler 0]

I'll have credit for that little find back in early 09, stick a mk 2 Goof scuttle cover on (requires some cutting for the washer fluid tubes and earth strap and some heating up to get it to sit nicely) and you have a very OE looking full scuttle option.

 

Don't buy the ebay item it's more expensive than a new one from VW! Should be around £8 inc VAT for one.

 

The brake cooling duct 'ears' are also less than £5 a piece from the stealers too.

 

Other plastic bits you can also fit are the wishbone leading edge stone deflectors from the '93 to '96 Passat too, the only fit the 4 cylinder cars but again help to keep the amount of crud getting flicked around the by the driveshafts down.

 

Still trying to find a cheap way of fitting a complete undertray but that looks like a scrappy job only.

 

Can anyone provide the part number for the motor cover please.

 

 

Sent from iPhone 4 using Tapatalk

[Yandards 0]

3a2 955 128

[dragon green 4]

Have you the part number for the golf scuttle panel ? Please

[Yandards 0]

Have you the part number for the golf scuttle panel ? Please

 

Yep 192 819 415C should be around £35 inc VAT.

 

It does need heating up to get it to fit properly as the 'rado one is just a little wider, make sure you get plenty of extra clips to hold it down too.

 

Not got a photo of mine yet, trialed it on the 16vG60, but best bet is to use a fresh stanley blade to cut the plastic to fit where required. If you have a jetex pollen filter it's a very tight fit and the plastic is quite brittle so be careful at that end.