New Wheel Bolts??

[Johnny H 0]

Hi guys

 

I've just got myself some 17" BBS RX2's and I want new alloy bolts and locking bolts to go with them.

 

Im not really sure what to look for, so would love some help please?

 

I've got some 5mm spacers for the front to miss the Brembo's and might get some for the rear to fill them out aswell.

 

Hope someone and point me in the right direction??

 

Thanks Johnny.

[Harrier 1]

I would speak to someone like Rimstyle .They will probably have what you need. I have RX2's with 5mm spacers also,so if you need i could measure them or post pics if that helps

[Johnny H 0]

I would speak to someone like Rimstyle .They will probably have what you need. I have RX2's with 5mm spacers also,so if you need i could measure them or post pics if that helps

 

That would be great thanks Harrier.

I'll give them a ring today to see what they say as well.

Johnny

[Johnny H 0]

Anyone else have any ideas?? :)

[Portent 0]

Try calling any distributor of bbs alloys?

[VW_OwneR_85 2]

Hi guys

 

I've just got myself some 17" BBS RX2's and I want new alloy bolts and locking bolts to go with them.

 

Im not really sure what to look for, so would love some help please?

 

I've got some 5mm spacers for the front to miss the Brembo's and might get some for the rear to fill them out aswell.

 

Hope someone and point me in the right direction??

 

Thanks Johnny.

 

if you want spacers , then get hub centric spacers , as these also have a built in spigot to take the load , they also come supplied with either radius or tapper seat bolts , think the minimum thickness is 15mm though so best check with what you can take,

[Johnny H 0]

Thanks but I'm only looking to put 5mm spacers on.

Don't think the car will take spacers that big :lol:

I'll give RimStyle a ring In the morning but I don't think they sell bolts on there own.

 

---------- Post added at 3:42 PM ---------- Previous post was at 3:25 PM ----------

 

Just found this:- http://www.venommotorsport.com/product_details.php?id=6436&manufacturer=Venom%20Wheel%20Bolts&category=Wheel

 

Will ring them in the morning as well

[Harrier 1]

Here is what i have Johnny,the threaded section is 30mm.These were supplied with the wheels & the spacers added more recently so you could go to 35mm. Daren

[Johnny H 0]

Thanks mate

Do you find the 30mm ok with the spacers then? It's just the next size up is 41mm, and I think that's too big for the abs rings.

[Harrier 1]

Yes 41mm will be too long,stick with 30mm in that case, & then you can use them without the wheel spacers if you wish.

[Johnny H 0]

Yes 41mm will be too long,stick with 30mm in that case, & then you can use them without the wheel spacers if you wish.

 

Thanks Daren

Your a top man :)

 

---------- Post added at 7:12 PM ---------- Previous post was at 5:31 PM ----------

 

Does anyone know if the BBS wheels will need Radius or Tapered bolts???

 

And it's 35mm bolts I need cause just seen its 12mm spacers going on the front not 5mm :lol: should check these things really :)

 

Thanks Johnny

[Harrier 1]

They are tapered,the standard bolts are radius i think

[Johnny H 0]

Thanks mate. I just couldn't tell from your pic.

 

Nothing's ever easy is it. :lol:

[seanl82 23]

To bump this thread, I'm after a full set of standard wheel bolts as my current rusty ones will stick out like a sore thumb with freshly refurb'd wheels and new centre caps. Vw and some of the alloy wheel specialists online want around £3.50 each! I'm loath to pay £70 for a set of bolts, so if anyone can suggest an alternative I'd be very grateful! Thanks all.

[Jim 2]

What wheels are they? If they're solitudes as per your picture, I run a set of the black plastic wheel nut covers which help cover up any rusty crummy wheel bolts :)

[GlosterOx 0]

To bump this thread, I'm after a full set of standard wheel bolts as my current rusty ones will stick out like a sore thumb with freshly refurb'd wheels and new centre caps. Vw and some of the alloy wheel specialists online want around £3.50 each! I'm loath to pay £70 for a set of bolts, so if anyone can suggest an alternative I'd be very grateful! Thanks all.

 

I got some off E Bay for less than £20.00 a set, will see later if I can find the Invoice.

 

Ian.

[seanl82 23]

It's the Rx228s Jim. Caps are a last resort, I think they'd be too obvious with the wheels, although I'd be happy to be proved wrong! Ian, thanks mate appreciate it! :thumbleft:

[GlosterOx 0]

These are the one's I bought Sean, fitted my RX2's perfectly:

 

http://www.ebay.co.uk/itm/20-x-RADIUS-ALLOY-WHEEL-BOLTS-FOR-VW-VOLKSWAGEN-CORRADO-VR6-5-BOLT-NUTS-7R-/321007256899?_trksid=p2054897.l4275

 

Ian.

[seanl82 23]

Thanks Ian!

[g0ldf1ng3r 15]

These are the one's I bought Sean, fitted my RX2's perfectly:

 

http://www.ebay.co.uk/itm/20-x-RADIUS-ALLOY-WHEEL-BOLTS-FOR-VW-VOLKSWAGEN-CORRADO-VR6-5-BOLT-NUTS-7R-/321007256899?_trksid=p2054897.l4275

 

Ian.

 

Thanks from me too Ian. I have been looking for some well priced bolts for the BBS RX's im refurbing for my valver (they have a good range available) :)

[GlosterOx 0]

Thanks from me too Ian. I have been looking for some well priced bolts for the BBS RX's im refurbing for my valver (they have a good range available) :)

 

Aren't the bolts for the 4 stud different to 5 stud though?

 

Ian.

[g0ldf1ng3r 15]

Aren't the bolts for the 4 stud different to 5 stud though?

 

Ian.

 

They are indeed Ian - i had a look at the sellers other items & they have the correct bolts for 4 stud valver pattern.....& they do a variation which has locking bolts included too

[GlosterOx 0]

They are indeed Ian - i had a look at the sellers other items & they have the correct bolts for 4 stud valver pattern.....& they do a variation which has locking bolts included too

 

Cool, thought I'd query it though!

 

Ian.

[g0ldf1ng3r 15]

Cool, thought I'd query it though!

 

Ian.

 

Thanks Ian - it was a helpful question as it made me double check.

 

It is great that we have such thoughtful & knowledgeable members on here, very much appreciated