VR6 - Random parts

[Rams 0]

Polished rocker cover with appropriate gasket, when I had it fitted it was gleaming so just needs so wet and dry/autosol to return the shine.

 

£50 plus delivery

 

Miltek sports de cat pipe with Lamba which I can't get out.

 

£25

 

Set of calliper carriers, they have been blasted and wet painted professionally in black, had them done and realised they didn't fit my car. Part number 5612/41211 and 5612/4 2191. If anyone knows what they would fit I'd appreciate it?

 

£45

 

OBD1 inlet pipe in perfect order

 

£15

 

OBD1 late ecu in perfect working order

 

£45

 

Audi TT 4 inch MAF and suitable AST silicone pipe adaptor

 

£40

 

OBD1 MAF complete with sensor, again, perfect working order

 

£30

 

Coolant Thermostat housing

 

£10

 

More parts to be added. The above are all without postage, so postage costs would be additional. Located in Bournemouth for those who wish to collect.

 

Cheers

[Rams 0]

Continuing

 

Vr6 fuel pump sender and pump, runs quietly

 

£40

 

PCV valve and carbon canister / solenoid valve

 

£15

 

Snorkel plastic surround

 

£5

 

VR6 oil sump, not old and has a graze but purely an outer grace and hasn't deformed internally. I have the gasket too.

 

£35

 

Another 4 inch to 3 inch adaptor silicone hose brand new by AST Technologies

 

£5

[CazzaVR 0]

I'll take the decat please mate. Are you going to National Day? If so I could have it then, otherwise could you post?

[Rams 0]

Sure thing, its yours. Should be attending National Day.

 

Decat now SOLD

[Rams 0]

More pictures added

[Rams 0]

For those who have asked, this is the adaptor, brand new, never fitted and black. I actually have 2 and the stainless hose clamps. Made by AST.

 

Wide end 102mm narrow end 76mm

 

Cheers

Rams

[VWVW 1]

Hi Rams interested in the sump + Gasket. How much posted ?

[Rams 0]

To post out, £10 should cover it, is that ok with you?

 

Now Sold

Edited May 9, 2013 by Rams

[Rams 0]

Ecu now sold and sump.

 

Have found another sump gasket if anyone needs one. Good condition

[VWVW 1]

Sump and Gasket received today cheers Rams

[dj b 10]

Will the MAF fit my 94 vr6? how do I know? thanks and sorry if its a dumb question

[Rams 0]

Sump and Gasket received today cheers Rams

 

Jolly good, you can tell its quite new, will you paint it or protect it before you install it?

[VWVW 1]

Jolly good, you can tell its quite new, will you paint it or protect it before you install it?

 

 

Thats the plan...Yes will give it a slight sand down and rust proof and paint it up

[Rams 0]

MAF now sold

 

---------- Post added at 10:05 PM ---------- Previous post was at 10:01 PM ----------

 

Oil pressure switch £3 plus delivery fully working order

[seanl82 23]

Ball sack, missed the boat on the sump and gasket......................:bonk:

[Rams 0]

Got another gasket if you need?

[Rams 0]

Dragon, do you need the inlet pipe as pictured or do you just need the small pipe coming off it to the PVC valve?

 

I have both as the one pictured earlier in the add was a damaged inlet but the pipe coming off it was fine but pictured that one as they look the same and it was closest to me whilst i had my camera but this is the good inlet.

 

Basically I can sell you just the pipe work instead of the inlet and I can sell the inlet separately.

 

Cheers

Rams

[Rams 0]

ECU and MAF posted out today.

 

Chrome rocker cover and matching gasket available. I may even re polish it if I get board, just needs some wet and dry/autosol as all the work sanding and polishing has been done previously.

 

Calliper carriers not sure what they fit but part number is listed.

[dragon 0]

Just the small pipe coming off it mate

[seanl82 23]

Got another gasket if you need?

 

 

Is it an early type (fibre?) or late (rubber?), as I need the later type whichever it is mate. If so, how huch do you want posted? Cheers buddy!

[Rams 0]

It's a late one, from my 95 VR. Rubber type. Postage will need a biggish box to keep it flat... What would you be happy to pay?

 

---------- Post added at 6:15 PM ---------- Previous post was at 6:13 PM ----------

 

Just the small pipe coming off it mate

 

Ten of your finest, delivery a few quid

[seanl82 23]

Is it Genuine or an OE Replacement?

 

What would you be happy to sell for?? :norty:

[Rams 0]

Believe original, how would one tell?

 

---------- Post added at 2:47 PM ---------- Previous post was at 2:46 PM ----------

 

Set of standard injectors available for VR6, removed when I upgraded to 440's.

 

£50 plus delivery for the lot

[stuarttaylor37 13]

PCV valve and carbon canister / solenoid valve

 

£15

 

I'd like this pending reply to PM please

[dragon 0]

Hello Ram have you received my MSG on the part mate