Breaking Blackberry VR6 With Beige Leather

[emu 0]

1994 M reg car with around 165k miles on.

 

All prices include postage if not stated otherwise

 

Pictures will be uploaded when available or on request

 

Interior

 

- Front seats + rear seats + 4 door cards, leather was reconditioned but driver seat needs some work and everything needs good cleaning as has some dirty marks - £500 + postage and packing, collection preferred

- Carpet, very clean and no rips or tears - £60

- Euro seat belt conversion for UK cars, whoever asked me before about it, please PM me now - £100

- Boot Plastics - £40

- Kick panels, passenger is ok, driver left is cracked but usable, fiber glass from behind will do the job, driver side right (big one) was black painted beige is in good condition - £35

- Headlining + sunroof trim, very good condition - £50 COLLECTION ONLY

- ABS Light - £12,50

- Headlight switch - £25

- Heater Controls - £60

- Centre dashboard console, no cracks or missing parts, light screwdriver marks from removing stereo - £45

- Centre tunnel + leather gear gaitor, all complete bare gear knob - £50

- Boot carpets - £25

- Beige parcel shelve with BRAND NEW genuine corrado (not golf) straps fitted 6 months ago - £65

 

Exterior

 

(Sunroof + wings provisionally sold)

 

- 4 x Speedline wheels with Yokohama tyres - £140

- Bumpers, needs respray -£10 + postage

- Bonnet, needs respray - £30 COLLECTION ONLY

- Rolling shell will be available when I finish striping everything. Very solid and no rust, brand new windscreen fitted, needs respray due to tiny storage sccratches. Koni top adjustable shocks + H&R springs Price will reflect what will go with it but price wise £100-250

- Front chrome Inpro Lights - £100

- In.Pro Fogs + indicators, almost brand new, fitted for 150 miles - £150

 

Brakes

-288mm front set up, Brembo disc + greenstuff pads, done 4k miles max from new - £100

 

Engine

 

- SP 263 cams + ECU maped by Stealth Racing on 209PS. No other mods in car except SS Milltek cat back exhaust - Cams + ECU -£415 or £600 with exhaust

- Miltek exhaust cat back (need to check condition when will be removed) - Price wise around £215

- Intake manifold + Throttle body - £60

- Radiator + fans + elbow - £115

 

Everything else, please ask

[emu 0]

Passenger handle sold, driver available at £40 posted

[imyhamid 0]

looking for the plastic trim at the rear of the headlining, holds the rear of the headlining down, hope that description makes sense.

 

cheers, Imran

[Alan h 10]

You interested in selling suspension if so how much and how much does it lower it by

[emu 0]

looking for the plastic trim at the rear of the headlining, holds the rear of the headlining down, hope that description makes sense.

 

cheers, Imran

 

It makes perfect sense, £20 posted

 

---------- Post added at 2:35 PM ---------- Previous post was at 2:34 PM ----------

 

You interested in selling suspension if so how much and how much does it lower it by

 

 

Suspension not really for sale as shell must be rolling

[Stonejag 10]

Pics of the inpro fogs + headlights?

 

Second dibs on the driver's wing if it falls through, please.

 

Nick

[imyhamid 0]

send me paypay details and i can send you the money for the trim.

 

Cheers

[seanl82 23]

How much posted for B pillars mate?

Edited June 27, 2013 by seanl82

[emu 0]

How much posted for B pillars mate?

 

Sorry but A and B pillars will be sold as euro seatbelt conversion.

 

---------- Post added at 6:41 PM ---------- Previous post was at 6:39 PM ----------

 

Pics of the inpro fogs + headlights?

 

Second dibs on the driver's wing if it falls through, please.

 

Nick

 

 

[Southie 10]

Dash centre console please

 

Also how much for handbrake trim leather gear gator?

[emu 0]

Dash centre console please

 

Also how much for handbrake trim leather gear gator?

 

- Centre dashboard console, no cracks or missing parts, light screwdriver marks from removing stereo - £45

- Centre tunnel + leather gear gaitor, all complete bare gear knob - £50

 

-£85 for both

 

 

---------- Post added at 7:35 PM ---------- Previous post was at 7:34 PM ----------

 

Console just sold on ebay, sorry

[Philstrm250 10]

I'll take the 288 front brake setup please and the Miltek cat back, as long as it's in good, solid condition.

 

Is the PCV valve and pipework available, if so, condition please?

 

Do you know what the mileage is on the 263's?

 

Many thanks

[emu 0]

I'll take the 288 front brake setup please and the Miltek cat back, as long as it's in good, solid condition.

 

Is the PCV valve and pipework available, if so, condition please?

 

Do you know what the mileage is on the 263's?

 

Many thanks

 

Condition of milltek will be confirmed when I remove it, but never had any problems (blows etc.)

 

Mileage of cams around 10k

 

PCV and pipework available (will confirm condition when removed)

 

 

I'M AWAY TOMORROW TILL MONDAY SO WILL GET BECK TO ANYBODY WHEN I'M BACK

[perky15 0]

any chance you could price posting roof lining? and sunroof lining? and would you do a deal then on these and the cams

[emu 0]

any chance you could price posting roof lining? and sunroof lining? and would you do a deal then on these and the cams

 

I would be able to make some wooden frame and use lot of cardboard but it will cost you a fortune. I'd have to ask £100 for both this things posted and I still will not take responsibility if courier will brake it.

[perky15 0]

ok maybe a bit silly then

 

would you sell cams without ecu?

[emu 0]

ok maybe a bit silly then

 

would you sell cams without ecu?

 

I'd rather sell it complete but will split them if nobody buy a set, let say within a 2 weeks.

[Philstrm250 10]

Condition of milltek will be confirmed when I remove it, but never had any problems (blows etc.)

 

Mileage of cams around 10k

 

PCV and pipework available (will confirm condition when removed)

 

 

I'M AWAY TOMORROW TILL MONDAY SO WILL GET BECK TO ANYBODY WHEN I'M BACK

 

Ok mate,

 

I'll take the Miltek cat. back, 288 front setup and the PCV valve and pipework please if all in vgc.

PM received, no worries at all. No rush for the exhaust or brakes and you'll post the hubs on Monday, many thanks.

 

What's the mileage on the Miltek exhaust mate?

 

Also have you got the long thin radiator plastic air guides that fit either side and do you have the under engine corner plastic air guides?

Price and condition if you have them please.

 

Cheers,

Phil

[emu 0]

Ok mate,

 

I'll take the Miltek cat. back, 288 front setup and the PCV valve and pipework please if all in vgc.

PM received, no worries at all. No rush for the exhaust or brakes and you'll post the hubs on Monday, many thanks.

 

What's the mileage on the Miltek exhaust mate?

 

Also have you got the long thin radiator plastic air guides that fit either side and do you have the under engine corner plastic air guides?

Price and condition if you have them please.

 

Cheers,

Phil

 

Honestly no idea what's the mileage on milltek

 

Radiator air guides, will have a look if they are in as didn't have a time to remove anything from engine bay.

 

Will get back to you next week.

[mic_VR 3]

What's the locking tab like on the fuel flap?

[Philstrm250 10]

Honestly no idea what's the mileage on milltek

 

Radiator air guides, will have a look if they are in as didn't have a time to remove anything from engine bay.

 

Will get back to you next week.

 

 

Ok mate, no problem.

I'll also take the radiator air guides if you have them and if they're in vgc, no cracks or splits.

 

Have a nice weekend and talk to you next week.

 

Cheers,

Phil

[emu 0]

What's the locking tab like on the fuel flap?

 

I think is fine, will send you picture next week when I'm back

[mic_VR 3]

I think is fine, will send you picture next week when I'm back

 

If its intact and the rest of the flap is good I'll take it, price dependant of course. Cheers mate.

[onestep 0]

How much for the front indicators?

[Gareth192001 10]

Whats the difference between uk and euro seat belts?