Jump to content
jack_t

breaking 92 2.0 16v bright black metallic

Recommended Posts

Breaking 92 2.0 16v bright black metalic rado

car has approx 112k on it and i've already stripped it down to parts

Due to new project

 

Bonnet - £10 collected ( Aqua blue no rust couple of small stone chips under mats in great condition 0

Bootlid - £20 collected

O/S door - £25 collected

mirrors 35 for the pair

Fuel Flap - £5 posted

Sunroof panel - £10 posted ( have a black one with a small dink and slight rust patch on rear edge or a perfect aqua blue one with a small scratch)

Front (slam) panel - £10 collected

 

Engine:

2.0 16v with Kr cams

full engine, bay loom ecu intake metering head airbox gearbox drive shafts clocks £100

spare set of clocks £20

Spare ECU £10

 

Radiator £15

 

Engine Bay Parts please ask

 

 

Running Gear:

 

Front hubs - £20 for the pair collected

Front wishbones - £30 for the pair collected

Front ARB - £10 collected

Front crossmember - £30 Painted black collected

 

Electrical:

 

 

Front indicators No cracks £30

 

rear lights - 30 posted for the lot

Boot seal £10

 

Interior parts

Black a b c pillers £35 posted

grey b and c pillers £25 posted

set of grey boot carpets ( sides and Floor) £20 posted

VGC parcel shelf missing one strap no cuts £20 posted

Spare wheel

Black Dash - with speedo surround vents glovebox etc

Black Centre console

Seatbelts

Bonnet Release Lever

windscreen plastics

 

late front rear foglight swtich £6 posted

late hear screen heat £6 posted

SPOLER CONTROL UNIT £15 Posted

SUNROOF MOTOR £10 posted

 

 

there is lots i haven't listed

if you are after something then send me a pm and ill see if i can find it

Edited by jack_t

Share this post


Link to post
Share on other sites

What condition is the front bumper in? Where are you located and would you consider posting if I arranged my own courier to collect?

 

Edit: also interested in the powerflow exhaust, depending on condition and if you are willing to package for postage?

 

Cheers.

Edited by dumptyboy

Share this post


Link to post
Share on other sites
What condition is the front bumper in? Where are you located and would you consider posting if I arranged my own courier to collect?

 

Cheers.

bumper itself is ok but will require some attention to the bottom grill as it is not attached to the bottom edge of the bumper

yes you can arrange courier if you want it

Share this post


Link to post
Share on other sites

Can I have first dib's on the Mint black boot carpet's please and if you have the glovebox trim in good nick (cover's the hinges) I'll have that too.Thank's

Share this post


Link to post
Share on other sites
bumper itself is ok but will require some attention to the bottom grill as it is not attached to the bottom edge of the bumper

yes you can arrange courier if you want it

 

Also would you be willing to package up the exhaust for postage if I arrange collection? What condition is the exhaust in please?

 

Rob.

Share this post


Link to post
Share on other sites
Also would you be willing to package up the exhaust for postage if I arrange collection? What condition is the exhaust in please?

 

Rob.

exhaust is stainless and is in good condition was only on the car for 6k miles and yes i can parcel up

pic of bumper

20130921_153243_zpsbc8b80a4.jpg

Share this post


Link to post
Share on other sites

hello my name is juan. I am from Canada and just joined here.

I am still new to the corrado cars.

I am fairly familiar with the 4 door sibling. the Passat b35i.

 

I have a friend here in desperate needs of a rhd corrado non abs booster mounting bracket from a non abs equipped car with hydraulic shifter transmission.

is your car abs or non abs?

care to ship items to Canada?

paypal ready.

thanks.

can you send pictures to [email protected]?

thanks.

Share this post


Link to post
Share on other sites

abs sorry

and on that note i have the full abs loom pump and abs ecu as a bundle if anyone wants it

also got tilt steering coloum with stalks loom and cowls + key

Share this post


Link to post
Share on other sites

thanks for replying. how commun or rare is what I am looking for?

here in north America is easier to find a abs equipped car than a non abs

Share this post


Link to post
Share on other sites
thanks for replying. how commun or rare is what I am looking for?

here in north America is easier to find a abs equipped car than a non abs

 

Do you have a part number or an image of what you're after? I have a RHD g60 non ABS shell here

Share this post


Link to post
Share on other sites

no I do not have a part number or picture. I spent 2 hours yesterday night trying to find something.

can you send me pictures of the firewall on the engine bay?

I mean I can send you pictures of the left hand drive parts.

Share this post


Link to post
Share on other sites
no I do not have a part number or picture. I spent 2 hours yesterday night trying to find something.

can you send me pictures of the firewall on the engine bay?

I mean I can send you pictures of the left hand drive parts.

 

IMAG0404_zpsa7873870.jpg

 

IMAG0405_zps7c76b177.jpg

Share this post


Link to post
Share on other sites

that looks about right. so if that is a factory non abs car. how much for the complet eused assembly. brake servo; bracket and master with brake reservoir?

Share this post


Link to post
Share on other sites

Hi, is the rear bumper in good condition and does it come with bumper iron and the brackets to attach it to the body.

Thanks

Share this post


Link to post
Share on other sites
Hi, are the wiper stalks etc. late types and are how much for them posted please.

 

Thanks,

Andy

 

£20 posted

Share this post


Link to post
Share on other sites
£20 posted

 

Cheers for the reply, do you have the cowling as well that goes around them? very interested.

 

Cheers,

Andy

Share this post


Link to post
Share on other sites
Cheers for the reply, do you have the cowling as well that goes around them? very interested.

 

Cheers,

Andy

 

How about 50 posted for the full height adju colum with stalks cowl ignition and key and looms

Share this post


Link to post
Share on other sites
How about 50 posted for the full height adju colum with stalks cowl ignition and key and looms

 

Sounds good, could you post a pic of it up please just before I send the funds?

 

cheers,

Andy

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...