Jump to content
Rorgasm

Blueberry (MOO) Cat D resurrection

Recommended Posts

Thought it was about time I put an update up about OldTax’s cat D Write-off. Following on from the thread

 

http://the-corrado.net/showthread.php?t=85355

 

I’ll try not to be longwinded with the details.

 

I purchased Oldtax’s Corrado (Moo) as it seemed a shame to let another Corrado go to the scrap yard esp with the minimum damage it had received.

 

Basically a van had clipped the front driver side wheel bending the wishbone & popping the ball joint out.

 

[ATTACH=CONFIG]79710[/ATTACH]

[ATTACH=CONFIG]79711[/ATTACH]

[ATTACH=CONFIG]79712[/ATTACH]

Share this post


Link to post
Share on other sites

After inspection here is the list of things that need doing.

 

1. Uprate to VR6 Top Mounts

2. Replace both Wish Bones

3. Replace ball Joints

4. Replace ARB Link Rods

5. Replace Tie rod ends

6. Replace front suspension as a precautionary measure

7. Roccer cover gasket split & needing replacing

8. Coolant Flange cracked & needing replacing

9. 4x new tyres requires

10. Wing Mirror needs replacing

11. Interia needs cleaning or replacing

 

Here are a Few pics from Jobs 1-10, unfortunately tie rod ends proved to be a bit of a problem to get off so JMR will have to help with that once I take MOO for the alignment & M.O.T.

 

[ATTACH=CONFIG]79713[/ATTACH]

[ATTACH=CONFIG]79714[/ATTACH]

[ATTACH=CONFIG]79715[/ATTACH]

[ATTACH=CONFIG]79716[/ATTACH]

Share this post


Link to post
Share on other sites

seemed a no brainer, too good & solid to be scrapped. This is the problem now, insurance company's aren't interested in older car esp when you start adding the cost of Towing & hire cars. I'd be seriously upset if it happened to one of my other Corrados. Hope you managed to sort yours out Taylor?

Share this post


Link to post
Share on other sites

So moving on to the other Jobs;

 

7. Roccer cover gasket split & needing replacing

8. Coolant Flange cracked & needing replacing

 

Have done these jobs before & enjoyed it so for the expense of some new Manifold gaskets, roccer cover Gasket & a coolant flange I thought what the hell. Even shot blasted the manifold ect as well :cool:

 

[ATTACH=CONFIG]79734[/ATTACH][ATTACH=CONFIG]79735[/ATTACH][ATTACH=CONFIG]79736[/ATTACH]

 

[ATTACH=CONFIG]79737[/ATTACH] [ATTACH=CONFIG]79738[/ATTACH]

 

[ATTACH=CONFIG]79739[/ATTACH][ATTACH=CONFIG]79740[/ATTACH][ATTACH=CONFIG]79741[/ATTACH]

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...