1989 Nugget Yellow 16V/20VT Corrado Breaking! Lots & lots of Parts! Sad Times :(

[pj027235 10]

Do you still have the mass airflow valve and/or the petrol tank straps?

Cheers, Phil.

[Guest sam1990rhodes]

Hi, is the front cross member is available?

[rado-steve 0]

do you have the fuse box cover/clips? also whats left from the 1.8t conversion?

 

Mmm Bit late Replying :-/

 

Yes I have the clips & Cover!

 

Got some G60 Driveshafts from the conversion, thats all really, and a MAP sensor I think.

[rado-steve 0]

Do you have both front windows? And what condition are they in? Any scratches etc? Thanks.

 

Again, Apologies for late reply, not been on here for a while :(

 

Yes I have them, drivers side has a scratch in it, passenger side is fine.

[rado-steve 0]

Do you still have the mass airflow valve and/or the petrol tank straps?

Cheers, Phil.

 

Nope, sorry.

[rado-steve 0]

Hi, is the front cross member is available?

 

Yes it is :)

 

Thanks

[Hofmiester 10]

Do you have a 280mm brake calliper? Should be stamped with "54" thanks

 

 

Sent from my iPhone using Tapatalk

[rado-steve 0]

Do you have a 280mm brake calliper? Should be stamped with "54" thanks

 

 

Sent from my iPhone using Tapatalk

 

Hi,

 

No mine had 256mm as it was a 16V, I upgraded these to 305mm Brembo's from an Ibiza Cupra R

[Bfstrachan 10]

Don't happen to have drivers headlamp for early spec?

 

 

Sent from my iPhone using Tapatalk

[rado-steve 0]

Don't happen to have drivers headlamp for early spec?

 

 

Sent from my iPhone using Tapatalk

 

Both Sold mate, cheers

[dragon green 5]

Have you a fan controller,part no.1H0919506A

Looks like this

[rado-steve 0]

Have you a fan controller,part no.1H0919506A

Looks like this

 

Thats from a 9A 16v (2.0)

 

Mine was a 1.8 16V (KR) so they didn't have them.

 

Sorry

[rado-steve 0]

Sorry to everyone who sent PM's, they are all now replied too.

 

Had an "Off" on my motorbike & used a road sign as an airbag....it hurt somewhat :(

[mic_VR 3]

Sorry to everyone who sent PM's, they are all now replied too.

 

Had an "Off" on my motorbike & used a road sign as an airbag....it hurt somewhat :(

 

Ouch! Hope you're OK mate.

[MZpog 10]

Ouch! Hope you're OK mate.

 

That's not what you ask a biker, you should ask "is the bike ok?"

 

Seriously, hope your ok Steve.

[rado-steve 0]

Ouch! Hope you're OK mate.

 

Getting better fella Thanks, Slowly, but getting there

 

That's not what you ask a biker, you should ask "is the bike ok?"

 

 

 

Seriously, hope your ok Steve.

 

Ha! It came off better than i did, sadly its all the plastics that have copped it....expensive :(

 

Cheers Though

[Guest sam1990rhodes]

hi mate, what did you do for the throttle cable? if it was an AGU do you still have it?

[rado-steve 0]

hi mate, what did you do for the throttle cable? if it was an AGU do you still have it?

 

Mine was an AUQ so was DBW

[Stevenjohnson1984 10]

Hi there mate do you still have both headlights?? Cus I'll av them my number is 07467141491

[kpl 10]

Hi, do you still have the heater blower? I only need the resistor

[MZpog 10]

Hi, do you still have the heater blower? I only need the resistor

 

If your resistor appears duff, it may be the thermal fuse which costs less than £1 to replace if your ok with soldering.

[rado-steve 0]

Hi, do you still have the heater blower? I only need the resistor

 

Hi,

 

Yes still have the Blower Motor.

[rado-steve 0]

Hi there mate do you still have both headlights?? Cus I'll av them my number is 07467141491

 

Nope, sorry