Finch 10 Posted July 25, 2015 hi guys got 17 inch wheels on my car running 205/40/17's looking to drop it by 40mm all round is it likely to catch anywhere or should I be ok plus looking at buying some apex's springs anyone got any feedback what there like or suggestions for good springs but don't want to spend to much thanks Quote Share this post Link to post Share on other sites
Harrier 1 Posted July 25, 2015 You will probably need to get the rear arches rolled with that drop. Fronts will be ok though. Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted July 25, 2015 I would say it depends on the width of the wheel and the et, offset measurement. Quote Share this post Link to post Share on other sites
madmatt 10 Posted July 25, 2015 and if the car is wide or narrow track Quote Share this post Link to post Share on other sites
will 2 0 Posted August 15, 2015 (edited) i had 17 s on mine but had low profile tyres i think were a 40 profile no arch mods and didn't rub 100_0011.jpg (342.3 KB) Edited August 15, 2015 by will 2 Quote Share this post Link to post Share on other sites
fla 9 Posted August 16, 2015 If the et is less than around 33 then it will rub on the rear arches towards the front of the arch. Ideal offset would be 35 that would still give aesthetic width and keep the tyres from rubbing. Quote Share this post Link to post Share on other sites
