GUS 0 Posted October 13, 2016 Any idea how I can resolve this. Been like since I bought the car, looks like it was temporarily screwed together somehow. Quote Share this post Link to post Share on other sites
VEEDUBBED 0 Posted October 13, 2016 Two things may have happened, the round bumper locating ring has probably come Out of the locating runner, unbolt the bumper, pull it forward to detach it then check. If the plastic round bit that slides into the runner is ok, just guide it back in and bolt back up. Sometimes the actual bracket itself comes unstuck from the inner bumper and that's a bitch to rectify. I reckon its just slid out of its guide. Quote Share this post Link to post Share on other sites
GUS 0 Posted October 13, 2016 Thanks for the advice. Quote Share this post Link to post Share on other sites
lilfuzzer 1 Posted October 13, 2016 hopefully as andy jst says out of guide but if they broken I have some spare if you need any Quote Share this post Link to post Share on other sites
GUS 0 Posted March 29, 2019 3 years late, but finally getting round to sorting this out. Does anybody still have this slider/runner thing Quote Share this post Link to post Share on other sites
GUS 0 Posted March 29, 2019 Is this the part I need. https://www.ebay.co.uk/itm/VW-Corrado-Front-Bumper-Guide-Bracket-Right-Driver-Off-Side-535-807-194/153429810017?hash=item23b9211b61:g:~Y8AAOSwSk5cmpm3 Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted March 30, 2019 You could need one like that if yours is broken, but chances are the bumper runners aren’t located in it properly. You need to strip it down and take a look, you don’t want that one anyway it has a broken bit. Lilfuzzer ^^^^^^ will have a better one and cheaper I bet too. Quote Share this post Link to post Share on other sites
GUS 0 Posted March 30, 2019 OK, and if the runner is broken I'll drop you Lilfuzzer a PM. Quote Share this post Link to post Share on other sites
