kitharrison 0 Posted July 19, 2004 Does anyone know where I can get hold of 2 seat height adjuster handles for my G60. They were missing when I bought the car. Any advice on how to fit them would also be appreciated. Muchos gracias :roll: Quote Share this post Link to post Share on other sites
Henny 0 Posted July 19, 2004 they are just held on by a screw headed bolt (m6 IIRC) The only place I can think of getting 'em from is a dealer... have a look at the metal bit they attach to and you may find that the screw is still in there as the handles are known to snap off with careless owners/passenger not being careful with their feet... :evil: :roll: Quote Share this post Link to post Share on other sites
kitharrison 0 Posted July 19, 2004 I'll have a quick look at the metal bits then and get them ordered - unless anyone has 2 spares going?! thanks Quote Share this post Link to post Share on other sites
PhatVR6 0 Posted July 19, 2004 lots of people remove them as they tend to dig into the back of some peoples legs. Quote Share this post Link to post Share on other sites
kitharrison 0 Posted July 19, 2004 difficult to tell whether my legs are compatible with them not being there - I think they snapped off originally, careless owner! Quote Share this post Link to post Share on other sites
daves16v 1 Posted July 19, 2004 My passenger seat handle was missing, so I made one up at work and painted it Black. Now there's a thought, I could make a couple using polished stainless 8) Quote Share this post Link to post Share on other sites
crazymarcel 0 Posted July 19, 2004 Possible production there daves16v, I would have some crome ones if u could make some. :D Quote Share this post Link to post Share on other sites
daves16v 1 Posted July 19, 2004 Crazymarcel, I'll see what I can do. Quote Share this post Link to post Share on other sites
ghee60 0 Posted July 24, 2004 yes please on the stainless ones Quote Share this post Link to post Share on other sites
daves16v 1 Posted July 25, 2004 I need a bit of time on this one. The handle I made was quickly thrown together and is not stainless. Watch this space. Quote Share this post Link to post Share on other sites
daves16v 1 Posted July 28, 2004 Ok, so here's my first attempt................... 8) Haven't had time to fit them to the seats yet but I'm sure they'll look good. Dave Quote Share this post Link to post Share on other sites
crazymarcel 0 Posted July 28, 2004 Nice Work daves16v, looks most impressive :D Look forward too seeing them fitted or you selling me a set :) Quote Share this post Link to post Share on other sites
Red=Fast 0 Posted August 9, 2004 wow, that is a nice upgrade from the lame fragile stock ones. Quote Share this post Link to post Share on other sites
Nick_Micouris 0 Posted August 9, 2004 blimey! nice work :) Quote Share this post Link to post Share on other sites
Henny 0 Posted August 9, 2004 Lookin' good.... :) 8) Quote Share this post Link to post Share on other sites
Phil K 0 Posted August 10, 2004 Are you going to be selling these Dave? Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 10, 2004 If there is enough interest then yes. Perhaps I should start a new thread for a group buy. Quote Share this post Link to post Share on other sites
crazymarcel 0 Posted August 10, 2004 Yes lovely work Dave, :D I would be up for a pair if you are selling them. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted August 10, 2004 Me too :wink: Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 10, 2004 Please add your name to the group buy I've just started Quote Share this post Link to post Share on other sites
Supercharged 2 Posted August 10, 2004 where is it?? Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 11, 2004 Can one of the MODS please make my seat handle group buy sticky status? Thanks Dave Quote Share this post Link to post Share on other sites
VR6 0 Posted August 11, 2004 I think, seeing as though you probably stand to profit from the 'group buy' it's a bit unfair to sticky it. If I'm wrong, I apologise, and would be happy to change the decision - just let me know if you think it's unfair. Quote Share this post Link to post Share on other sites