1xshaunx1 27 Posted June 27, 2022 Don’t over tighten them bolts or the captive nuts will break loose, then it’s pretty much goosed. the seal is the o-ring as people’s have said. Try a slightly fatter top quality o-ring with some silicone grease to help it in. Quote Share this post Link to post Share on other sites
Keyo 49 Posted June 27, 2022 (edited) On 6/27/2022 at 2:51 PM, 1xshaunx1 said: Don’t over tighten them bolts or the captive nuts will break loose, then it’s pretty much goosed. the seal is the o-ring as people’s have said. Try a slightly fatter top quality o-ring with some silicone grease to help it in. Thanks for the advice everyone - Ive got some oe seals coming tomorrow - i will use a bit of silicon on the seal- if it leaks after that it must be the radiator warped side so hopefully a bit of RTV will cure that if it leaks again . I will post the seal that came off and compare to the OE one. Edited June 27, 2022 by Keyo Quote Share this post Link to post Share on other sites
