nzgti

hey daves16v......my drivers side bust on the weekend.... can you give me a bit more info and an all up price to New Zealand. cheers

Hey andy, I'm up for a set as well......the full monty plug and play version. I did this for my old corrado a few years back...But was never happy with the connections. So well done to invest the time to gget it running perfectly have you any photos of progress?? nearly forgot...I'm on the otherside of the world, New Zealand, so postage could be a bit more. Keep it up.

yes please...plug and play. I made a loom for my last corrado....would have felt alot better if i could still retain the old system (as a back up)....... ...postage to New Zealand too please.

i"ve got an idea for a project that I'm about to embark upon and require a bit of input. I need to replace a suitcase muffler...So While i'm at it why don't I revamp the Whole system. Currently i have 4 devices in the exhaust system. the rear bos...the suitcase muffler..and two silencers...they all look to be factory. What I intend to do is Leave the front silencer..and the 2nd silencer...remove the suitcase muffler entirely and run the pipe through to the rear box. OR....and this is where it gets interesting Do the Whole lot from the manifold down. 2.25 in..merging into one...a bit longer than what is already there..have a coby.2.25in to where the Suitcase is now...Replace that with a coby...and then into the rear box. Does any one have any pictures of their exhaust system that They have done, that I can use for some inspiration/ideas...go on...show us ya fancy miltek system...or better yet..your hoem made job. now before you ask WHY?...i've got a bit of time coming up...need a project, and fancy working on my Welding skills. Look foward to your ideas.

Had a quote to get it fixed $3-400, that about 170 pounds.....I think i can h=get a dash for half that. Am I right in thinking this is a regular 1990 Passat Dask.......I've a 1990 16v

Here are a few pics

Will post some pics tonight when I get home..

....while removing the stereo some thieves have busted the dash...looks dam ugly now. i can get a replacement but ....how difficult is it to remove? has anyone done it.....and is there a procedure that i should follow...pitfalls to watch out fore etc. It's either that or get someone to repair it. I'm getting a couple of quotes for the repair this week...depends on cost, it may be better to actually replace the dash

Sure do, But as most things are...it's sometimes cheaper to get stuff from the Uk. Are the lights a complete unit? or can you just replaxce the glass? Cheers

Hi there I've just got my corrado..1990 16v, only 140000km Was going over it yesterday and i noticed that i have a cracked headlight!!! Question is...Can you get a new lense?? and it so...where from cheers

bump

Talking to someone the other day, he explained a possible cause to the cold start problem as this. he told me this when I said that it normally happens on damp,humid days. when a car is cranking over, especially when cold it requires a lot of juice to do so. As so much of the batteries juice is being taken to crank the engine, there is not too much to provide the 'spark'. and especially when the distributor is leaking oil, and a bit humid, the connections are not all that great and the spark can get 'lost' or what spark that is there is weak.. seems all very plausible, especially seeing that when i'm having problems starting it, I can crash start it no problems at all, drive around the block(500M) 2 mins tops. I can then stop it and it'll fire up all ok no problem. I've got a 16v kjet engine. anyone have any thoughts on this?? I

No I think that the fueling is fine. it seems to me that the car does not know that it is cold and that it does turn on the choke to make it go. only i don't know how to check it all, where the sensors are and what the voltages should be etc......hence the need for some info about the 16v kjet engine. cheers

Hi there. it's getting colder over here now and the C is having problems starting in the cold mornings. hasa happend twice now pretty much as described above. it will turn over, make a funny Wheezing kind of sound and then appear to stop and then start winding over again. it winds over fine but no firing.. i can keep doing this untill it starts to flatten the battery!! But i can crash start it straight away no problems, run it around the block, 2 mins tops. stop it and start it straqight away!!! and it will be fine for the rest of the day....untill the next morning. so this has got me to think that i need to check my cold start up system my warm up regulator, functioning of the cold startinjector. etc.....only i don't have any info about this. Does anyone have and info about the 1.816v Kjet injection system? perhaps in a PDF format.?? any help appreciated. regards

Miune does this from time to time as well...Check the hall sensor under the distributor. if it ain't connectiing, it just won't go. I've used a zip tie to really bind it up as the clip is a bit bust.