badsamaritan

Hi folks.

A tone with a known working fuel distributor Bosch 0438 100 140

Thank you

I have a full black leather interior, just decided two days ago to break up my project. Seats front and rear and door cards. Early door cards I think. It’s in great condition, not perfect but very very good. I’m pretty sure there are no rips or tears, maybe a little saggy in the drivers bolster but that’s all. It’s stripped out of the car. I need to get it down from the attic and checked over 1st, then I can set a price, for now let me know if there’s interest.

Hi, strimmer, may be interested in your seats pal. What colour and where are you?

Hey dogger,

When are you going to give is another special on the Corrado rear spoiler here in the UK.

Just saw your old post on this.

Looking forward to a favourable response!!

Thanks

Banned where

Tax has nothing to do with us or our website. We do not charge taxes. Your country charges import taxes and will bill you once the parts arrive in the UK and are ready to be picked up at your local post office.

 

Shipping costs are shown on the website when you check out. I listed the total price for the rear spoilers including shipping at the top of the page.

 

Thanks Bryan. Its okay to buy from the website now.

Hey dogger,

When are you going to give is another special on the Corrado rear spoiler here in the UK.

Just saw your old post on this.

Looking forward to a favourable response!!

Thanks

Thank you.

 

mfg chris

Hi Chris, do you still have the bonnet sound proofing? Changed bonnet a few months ago but my car is a 1989 valver. Dont know hiw many different types there are but mine does not have a gum in tbe centre, if that's anything to go by

Hey - sorry, was on holiday and missed your other post. Just not as active on here any more since parting with my Corrado either!

 

Willing to knock out another small run of these as I think I could probably get 10 pairs or so sold. Leave it with me and I'll get it priced up.

That's fine pal, will await an update.

Thanks much

Hi Jim, do you still have these? I would like a set please

Any chance of getting feedback on this??

Hi Jim, do you still have these? I would like a set please

Think I have a tub of them lol.

 

Sent from my SM-A310F using Tapatalk

Hi pal, any chance you could spare me a few from your tub at a decent price??

Hi folks

Im desperately looking for rear corrado beige leather door cards.

The part number for the one i have which is now small after changing the motor is 535 877 847A and the part number for the other one which came with the motor is 3A0 877 847. This one is a passat one but because of its shape, it doesnt fit the corrado headliner

Dubstar81,lol!! Let me get this together, I thought you were after cloth ones with green fleck!! Anyway sorry abt that, I didnt mean no harm. It so happens I got the early cloth ones with green fleck if you are interested but they are electric. Just wanna change as i have fitted leather seats

Hi pal, checked my post and just realised its confusing. The one i want must have the sunroof switch as part of the interior light and take a sunroof motor that has 5 pins. Is that the one you have?? what is the part number, colour and price?? I ask this because the one i have is for the 4 pin motor and even though the interior light unit with integrated sunroof switch fits into the slot, when you fit the newer 5 pin motor, the light doesnt fit anymore. Seems 5 pin motor is bigger!!

You still have them door cards??.

Hi, I have early black leather door cards if interested.

Hi pal, still have the cards?? Are they in good nick and would you be prepared to post??

Any one with a late spec sunroof motor surround. I m looking for one with sunroof switch fitment on it!!

My question is do corrados have different types of headliners?? I ask this because I have just completed fitting a B4 passat sunroof complete with wiring and 5pin passat sunroof. On reassembly, using the corrado sunroof surround and switches, the switches no longer fit and the problem looks like the motor is slightly big. Right tried using the passat surround and it doesnt work. the passat surround is far from being a good fit to the headliner. I thought the passat and later golf surrounds were the same nad that is why i am asking if the corrados have differnt headliners. I have read several installations using the 5 pin motor and i cant figure out how those who have done it did it!!!

which type, early or late??

Hi guys

Just started wiring in some loom for the 5 pin sunroof motor for my 1990 Corrado. Got a passat b4 sunroof complete with loom. I have managed to splice the other 4 wires into the main loom. these are 1.yl/blk to yellow/black

2. red to red/white

3.brown to brown

4. brown/white to white/brown.

I have a problem with wire number 5 which is grey. I cant figure out where to connect this one. I have searched high and low and come out with many different posts but there is no mention of the grey wire. this grey wire comes straight from the connector that goes into the motor.

Any help would be greatly appreciated

 

Yeah pal county durham

 

Sent from my SM-G357FZ using Tapatalk

Hey pal

Is that lime green tailgate clean?? I mean no rust etc!! Any chance you might be going Leeds way in near future?? Also can i plse have your postcode so I can decide whether it makes economic sense to drive to Durham for the gate.

Looks like black is hard to come by so will settle for lime green, might even paint it myself for the time being before i have whole car spray painted

have been searching and found that the front fogs come from connector A2/08 in fusebox as a single white/yellow wire and splice somewhere along the line to another brown/ yellow wire for the right fog light. So i have been using the outside air temperature connection for the other fog light, hope this didnt damage anything. Can anyone please tell me where abouts this splicing takes place so i can begin tracing as to what happened to the other wire. PLEASE,PLEASE!!

I have rechecked my headlight loom again and found something strange. The connector R10 black/yellow wire has been removed from blue connector and spliced instead to red connector black/yellow wire H1/03. I'm awaiting delivery of a new headlight switch loom so I dont know yet if this could be the problem but all along it had been working properly on that set up.

 

I did make some changes recently though. I removed aftermarket immobiliser which was linked to ignition switch and other places, so i dont know if that changed the dynamics.

Fingers crossed!!

Hi guys,

Anybody to chip in, my problem still persists even after putting new headlight switch loom. Been looking at the A2 resource diagram and according to it I only see 1 wire (A2/08 white/yellow) going to the front fog light. My question is where does the other foglight connect to. When the fitting the front foglights I had seen another connection in engine bay similar to the one with white/yellow but it has brown/white and white/red wires. It didnt produce any current and i assume it was broken some there and so splice the wires onto the other foglight. I fitted the foglight because PO had fitted a bumper with no room for foglights so the wires were just dangling around

Guess it'd cost £5 to post so £30 posted?

I will take it. Would you by any chance have the sunroof loom for the same??

Let me have your paypal address so I can pay

Thanks

Any chance of a picture?? I take it you are in County Durham , I am in Leeds

I know a couple of aqua blue ones a green one a lime green one and I'll check the rest

 

Sent from my SM-G357FZ using Tapatalk

Brilliant, I might settle for the lime green one as my car is currently wrapped sunset orange. I think that would nicely contrast the orange. had preferred black because my bonnet is also black and black goes with many colours. What do you think?? How much??