andy35554

Hi sorry folks I will put some photos up tomorrow and prices on them all.

All the following are from my previously owned 1995 VR6 A full set of external rubbing strips/mouldings 2 chrome rear vw badges. One has the rear black plastic backplate. both have broken clips so will need to be secured onto the car with an adhesive 1 BBS wheel cap from the standard storm alloy wheels. One clip broken off rear but can be glued onto wheel I am happy to post out the badges but prefer to buyer to collect the door strips. This is not final just my preference. Photos to follow I am open to offers on all items thanks

VR6 | classic green | Cheshire Price: £2350 Description: Green Corrado Storm for Sale. With a tear in my eye I present you with my beloved Green Storm for Sale Its currently on about 165k miles and MOT was done in November. Tax is end of January I have owned this car since October 2004 and a full respray in about 2009 It has been on the corrado club stand at Tatton park a few times whilst in my ownership Over the years I have personalised it slightly but this is its current set up..... 288mm brakes - these will be staying on the car an essential upgrade All red light clusters at rear - these can be replaced by the original standard ones I have in my garage Clear LED side repeaters - standard ones can be replaced if required. Alpine head unit with full IPOD control (again original Sony unit and 10 disk multichanger available) Custom made bass box in boot Full cat back magnex stainless exhaust fitted Standard springs with koni t/a struts (eibach springs available) Custon LED high level brake light which is easily removed for the purist K&N air filter HID high low lamps (again can be removed for standard lamps if required) Interior is really nice condition Over the years I have done all the usual jobs on the cooling system including the heater matrix 6 months ago, radiator last year. Windscreen was replaced in June and all corrosion sorted round the seals There is a small dent on the passenger door from some a$$hole in a car park opening a door onto it but this can be sorted before the sale. The rubbing strips from the side of the car are removed but available if required I have used this car daily for the last 8 years All electrics work except the sunroof. One job I never got round to doing Clifford concept 650 alarm fitted standard grill and badgeless one standard bbs alloys Loads of history including MOT's and tax disks since I have owned it Any questions please ask as I am sure I will have forgotten something cant upload photos for some reason but happy to email a few out if interested PRICE REDUCED TO £2350

Hi, can someone advise the barrell part number? Or where to get it from? I have a 95 vr6 storm with the immobiliser factory fit. The electrical switch at the back of the barrell I have replaced but the intermittent problem of starting the car persists. I think the key barrel is worn out and I need to fit a new one. Can I just replace the barrell? Currently i have to turn the ignition on, then as i try and start the car push the key quite harsh upwards to start the engine. I can see a snapped key on the horizon! Thanks in advance for any replies.

Hi, i have just posted about them on your bits for sale thread! Have you got a photo of them and are they leak free?

thanks for the reply!

Hi, my front passenger side koni has sprung a leak so requires a new pair fitting, will consider changing the eibach springs too as the front sits a little higher than the back. cheers

Hi, is any of the suspension for sale? (namely the front shocks and springs) Also the blower for the interior ventilation, the 4 speed fan also the outer top door strips that rub on the window as it goes up and down cheers

Hi I have the same problem with my 95 c fitted with eibach springs, it clunks at low speeds when you turn it to full lock, do I just need to buy the early to plates? Out of interest front end of car sits a bit higher than the back, I understand there are lowering to plates is it wORTH getting them?

I have just had a look through the events list(s) and no sign of the "all types" show at Bodelwyddan castle in North Wales http://www.all-types.co.uk/

dont see one for ages then two in an hour first one on the A6 in clayton le woods, mine was parked at the side of he road behind a blue tvr griffith, i was stood at the side of the road only saw it at the last minute. than an hour later a silver one on the m58

i got pulled last week for german metal pressed plated. £60 fine...... Cheshire police having a crackdown, no warnings or slapped wrists, so be warned!!!

vr6 paul,, if you go to the stealers they can get the part numbers on the screen.. i know this will mean 2 trips but i dont have the part numbers regarding coolant i didnt drain mine, see my comments just beofre your post Andy

I have done all this to a set of 288mms, fitted them bled the system but stil la bit spongy, may have to bleed again. My question is, where do does the anti squeal shim go, its about the size of a brake pad thin plat piece of metal, does it go on the outer or inner brake pad? I am not too sure cheers andy

hi, thanks to this thread and the definitive one i done mine over the weekend, i removed my battery to do the rad stat too and this gave me a bit more room in the engine bay thanks for to the ppl who helped and done this write up cheers andy