Jump to content

VR6 Russ

Members
  • Content Count

    41
  • Joined

Community Reputation

0 Neutral

About VR6 Russ

  • Rank
    Newbie
  • Birthday 09/13/1984

Converted

  • Location
    Slough

Converted

  • Interests
    Vee dubs, Music, Football.

Converted

  • Occupation
    I.T Technician
  1. I have a company car and pay £47 a month on a 1.6 Focus. Its in a low emissions bracket. Nice to leave the Rado tucked up away in the garage until the weekend.
  2. I know running a car of this age will be costly, I have had the car for over a year now and this is the first major repairs i have needed, so I don't think i've done too bad. People think I am mad keeping it but there is no way I am driving a boring focus about at weekends. They just don't understand. MOT states its the the sub frame rubber bush that has gone, but are not resulting in excessive movement. And everything is more expensive in the south east. :x :x
  3. Right, after spending £800 on my new alternator, starter motor, abs sensor, MOT, service and tax, I finally got to drive my Rado again after 2 months. So I warmed the car up to a resonable temp and give it some down the back roads for about 10mins, and I get home to smoke pouring out of my bonnet. The radiator had blown and was pi55ing out water. :( :( And another thing it took me ages to get the bonnet open as I think one of the catches has seazed. Back to driving the boring rep car then. Also I got 2 advisorys on my MOT for my rear bushes, what would you reccomend?
  4. As above, not sure if mine is faulty and didn't show any faults in VAG-COM. Cheers
  5. I was getting quoted over £200 for the alternator and 6 hours labour for the alternator, starter motor and an hour for the sensor (£210). Surely it would'nt take them that long. Are they having me on... Would it be better buying the parts myself and getting them to fit it. I suppose the service wont be too bad, but I would need the book stamped. All I don't need is for the MOT to show anything else up. :roll:
  6. Hi all After owning my rado for nearly a year I have replaced quite a few things, shocks, springs, fuel pump, MAF, ISV, water pump, thermostat housing, fan relay, pads, plus a few more things I can't think of. At the weekend my VR6 decided to cut out on me (dead battery). So i put a multimeter on the battery and it is only showing between 11-12v when the engine is running, which i assume means the alternator has gone. Also the starter motor wont engage till the 3rd or 4th time (new one needed), the ABS light has just appeared (think its a sensor), my tax runs out at the end of the month along with the MOT and it needs a service. :( :( :( Just thought I would like to share my problems with you lot. Also whats a ballpark figure on how much this will cost. If its gonna cost over a grand I am thinking of cutting my losses and selling up. Rant over.
  7. All sorted now. They have changed the design of the fuel pumps for the VR6. My original one had a bracket to attach the fuel sender but the new one didnt. So now I have to shell out another £90 for it. But as a temporary measure I have cable tied the old unit to the new pump and it all works fine. Surprised no one else had come across this problem.
  8. I have just bought a new fuel pump for my VR6 and it looks different to my original one. There is nowhere to attach the sender unit. Anyone had this problem before.
  9. Ok i'll give that a try, anyone on here want them before they go on ebay.
  10. How can you tell if they are real or not and whats the best way to remove the without scratching the paintwork.
  11. I am wondering weather to sell my Storm badges (inside and out) as my rado is a standard VR6 and were on there when I bought the car. I quite like the fact that it fools quite a few people even with the wrong wheels and wrong shade of blue. But it does have the colour coded grill and leather. But I also know there quite rare and could be worth a bit. Do I keep them on there or make a few quid, and if anyone is intrested let me know.
  12. But is there an easy way to test it. The bloke said I can test the voltage changes as i blip the throttle but where do you test it. There are 5 pins on the MAF. Want to get this sorted soon as i'm probably damaging my engine.
  13. Hi all, I have just had my VR on the dyno and it produced only 181bhp. The bloke said the problem is probably with the air flow meter as the air flow didn't change as he reved it. Has anyone else had this problem and is there an easy way to check that my air flow meter is ok as I don't really want to spend £350 on a new one. Also would anything else cause this to happen. Cheers Russell
  14. All sorted now, wrong top mounts and getting sorted today, thanks for the help. :)
  15. Just after the springs mate. Anywhere else I can try so I can compare prices, but I need to order them ASAP as my car will be off the road. :mad:
×
×
  • Create New...