W3RKD
-
Content Count
3,897 -
Joined
Everything posted by W3RKD
-
i put my money where my mouth and got around to fitting one of our kits to my c today.Just been out for a drive and they honestly are 100% better than before you can actually see now !
-
someone wanted to see a close up of the wheels so here are a few more pics...
-
the uprated headlight loom is £50 + p&p comes with full fitting diagrams.
-
very nice corrado my friend!! this is what corrado's should look like !!! imo anyway!!!
-
Does a smaller charger pulley need a smaller drive belt?
W3RKD replied to Adam M's topic in Engine Bay
many differant companys have there own way to overcome this issue it really depends on where you go to how they do it. -
350bhp ish
-
they earth fine through were they are thanks! as for outlet it's a modded vag part :mad: we have modded the internals though!
-
about £6500 depending on what parts were prsented to us and what spec you are after
-
its a cr bolck not giving any more away at the moment!
-
we have a chip and pulley here waiting for you if you want it? i have been trying to call you adam....
-
yes the alt is under the g-lader!! its one of our own brackets built using a corrado block.....
-
thought some of you guys might like to see some pics?
-
http://vw.corradog60.de/drive.cgi?to=Te ... griff_(001) check this out!
-
£ 10 not bad! best for me was the koni coilovers !! bit more than £10 though
-
you a air gun on the pulley and remove the BOLT before removing the belt. as socttgroovez says you WILL need to remove the 4 allen bolts and the 2 allen and 1 13mm bolt to remove it from the brackets holding the charger! BECAREFUL not to over tighten the oil supply banjo bolts when putting them back on as they are quite weak! hth
-
check the milltek web site http://www.milltek.co.uk they have a pic of the above exhaust it has an oval tailpipe that fits perfectly into the bumper aperture! i cant give away all our secrets on my car but we can put you together a reasonably priced package to give you a VERY reliable 200 bhp one of the things about tuning these engines is COOLING! :roll:
-
i would only fit the powerflex in the rear of the wishbone! ( the donut looking ones) or else you might find the ride too harsh! " need constant trips to the dentist!" replace all the others with o.e ones to retain the quality ride...
-
so you didnt buy it to mod it eh??? not doing bad at keeping it std so far!!! :lol:
-
we can also supply all oe service parts at competative prices contact me for details if needed
-
deep dish wheels seem to be flava of the month at the moment usally in the form of 9-16" with a slightly stretch'd tyre over them most of the corrado owners run 71/2-17" on there cars though!
-
I think that might be a slightly different service than Darren was wanting to provide :lol: sorry I'll get me coat! umm yes dont do little pocket rockets best of going to your g.p for that!
-
yes go on then we will be there to show off our cars and try and help anyone who needs any help/advice on getting the best out of these little babys :mad:
-
ive got the audioscape to i think they are good but wasn't told they would require the speaker holes putting in them!!! :mad: they are good quailty though :fadein:
-
thank you corradog60 we do try to help and give everyone the same service wether the spend £1 or £10k :wink:
-
soon to have new paint job and some subtle body mods :evil: