Jump to content

blue95

Subscriber
 View Profile  See their activity

  • Content Count

    1,159

  • Joined

  • Last visited

  • Days Won

    1

Posts posted by blue95

  3. Posted

    On 9/22/2024 at 7:37 PM, oneohtwo said:

    Ah thanks.  I used the clamps that came with the HEL fuel lines they sent so assumed they were suitable, but having checked again they are just worm drive type clamps with an aluminium capping piece. I did notice that when I found the leak and retightened they did seem a bit loose. I will swap them out.

    The only nice thing is they finish off the braided hose quite nicely and stop any fraying. 

    I would have assumed the same as well tbh...maybe you can you use a band of heatshrink tubing.

  7. Posted

    On 5/22/2024 at 10:09 PM, _Matt_ said:

    No worries!

    I changed my FPR today with both my old one from my white corrado (orig part) and a new bosch 4 bar item. Just trying to cure long crank when warm still...

    Anyway - before changing when I disconnect the vac line my engine note noticeably changes, a touch higher revs. Trying both bosch and my old one the engine note does not noticeably change when disconnecting the vac line. Perhaps a slight lumpy idle but nothing noticeable.

    No idea what that means. Have left the new bosch fpr installed for now. 

    Weather is too miserable to test.

    Be interesting to see some live data whilst disconnecting / swapping bit out

  9. Posted · Edited by blue95

    that's good to know.

    The coil overs on my car are literally disintegrating, I just want to get somethings thats fit and forget, i mean often does the average joe really adjust coil overs?

    My only concern is the extra gubbins needed to go back to non coil overs, do you get all the bits in the Koni kit? or do you need extra parts? also wheres a good place to purchase all the bits from Cheers

  15. Posted

    3 hours ago, fla said:

    This looks stunning, do you really want to break it?  Btw, what supercharger do you have on it as i'm thinking of the same myself. What a supercharged VR like to live with (i know some make an annoying whining noise....)?  Mine has aircon, so just wondering if that would be an issue for an intercooler.

    Ive picked up another project, and dont want to have multiple cars, space becomes and issue lol. Problem is I have sunk a fortune into the black one, its a basically a new engine...literally. The engine was the new old engine that was stripped and inspected, mew seals, gaskets, chains etc etc, all new sensors, stands me at a few quid

  19. Posted · Edited by blue95

    3 hours ago, ChrisL said:

    Which engine cover?

    Hopefully sorted cover wise...still looking for an unmolested VR6 air filter housing and std steering wheel....im sure the list will expand lol

  20. Posted

    8 hours ago, Dox said:

    Just a warning re wanted ads and pms, be careful who you deal with, scammers are here now. Only trade with people in the open forum, use PayPal goods and services 

    😞 Desperate time.... I have been off here for a while

  23. Posted

    Just now, Keyo said:

    In regards to speaker size you had to ask audioscape to cut out size od speaker otherwise they would come holeless and you would cut the size yourself to suit- (6.5 I think) was pretty much the biggest size you could ask to be cut so maybe cutting out the 7 inch caused the issues . 

    Cheers, been a usefull chat 🙂 i really do need to find the tweeter holders now!

  24. Posted

    2 minutes ago, Keyo said:

    I recently refurbished the pocket with this stuff was perfect- picture of back of mine below. 

     https://www.ebay.co.uk/itm/Black-Velvet-Vinyl-Car-Fur-Wrap-Sticker-Air-Bubble-Free-Adhesive-Decals-V/262800048342?ssPageName=STRK%3AMEBIDX%3AIT&var=561795883107&_trksid=p2057872.m2749.l2649

    audio2.jpg

    Cheers, will trim it up, msgd Pete as wel  ;)....mine defo is the same casing but appears to have been modded, or as mentioned is a prototype?

  25. Posted · Edited by blue95

    8 minutes ago, Keyo said:

    Probably not thinking about it as im sure they made some early ones first without window switch housing - not sure to be honest, If you cant find the grills buy something like this 

    https://www.ebay.co.uk/itm/METAL-MESH-SPEAKER-GRILLS-6-5-DIAMETER-PAIR/124520930626?_trksid=p2485497.m4902.l9144

    Then do a small stamp into the grill to house audioscapes decal will be around £15 a pair delivered. Pete Aspery contact him on FB if you want a set of the decals. Could also paint the wood or get some cheap self adhesive velvet off ebay.  

     

    Cheers might just do that, having a quick measure again it looks like these will need a 7" speaker cover so 6.5" speaker, assume all audioscapes are built for 6.5" speakers?

×
×
  • Create New...