-
Content Count
534 -
Joined
-
Last visited
Posts posted by karmannski
-
-
Will be delivered coming Monday
-
Thank you Tomi
-
Was 200euro now 220euro + p&p, I'm tempted to buy a set to compare.
-
I can see that someone in Germany is also making repro trims, can any one tell about the quality of them etc?
I can see that they are just the rubbers with no aluminium support insight.
anyway my trims will be here next week.
-
-
Karmannski are you taking orders yet?no, I will once I have them with me.
But you can keep the money on the side, waiting.
Thank You
-
I have one more set of brand new Genuine trims if anyone is intrested for £1200.
btw.
I have put the full size samle on. Bear in mind that sample is not in the best form as it was not secured well in the transport so you can see few waves/bends on.
-
Hi guys
Window scrapers are doable too.
Same technic, once I will get my $$$$ back from this deal I will consider this.
The trims are coming without clips, but old are fine just required but of DIY. I also recommend 3m dual tape 6-9mm that was used in original trims to secure them.
Once the trims will arrive I will set the saling point somewhere in the net.
Postage should not be more than £15 in the postal tubes with filers.
Took long time but I hope that it will be a good repro.
I will keep you all up to date.
Adios Corradores!
-
Yes, mk2 was tested long time ago, mk3 recently and I go for mk2 (best result) I have ordered 50 sets and waiting for them to come. Will let you all know once they in. I did not order more because I need toBe sure that they will arrive safe as they are easy to bend like windows scrapers.
Not 50 but 250 sets are on order now, as the factory rejected my request of 50 sets, will be here me with in next 2-3 weeks.
And I'm hoping to offer them for ~£80 per set so that is £40 per side. But it still may change slightly. Lets just hope thay will arrive safely and all will be the same quality.
Happy Hallowen
-
-
Any idea on cost yet please, and I gather Mk 2 is the best for the Corrado. What happened in the pic.This was just sample that arrived and was not secured right .
-
-
Yes, mk2 was tested long time ago, mk3 recently and I go for mk2 (best result) I have ordered 50 sets and waiting for them to come. Will let you all know once they in. I did not order more because I need to
Be sure that they will arrive safe as they are easy to bend like windows scrapers.
-
problem solved.
Faulty lifters, got new lifters in sond sweet
-
I have recived Catch me daddy yeasterday from Amazon,
Brilliant Film - Modern Western, Drama - I recomend.
Gary Lewis had a spin in VR6 and switched to Volvo.
-
Yes mk2 sample on its way . Should be the final edition but need to test it first.
-
And I was heading down to Peterborough that day in my VR6 moonlight blue
http://pages.ebay.com/link/?nav=item.view&alt=web&id=271978691147&globalID=EBAY-GB
-
Not yet, I need to get stethoscope 1st.
I will have, more questions anyway.
-
As I susspected, the front clip I used was faulty.
I had another one, not 1st class but do the job, it holds the trim where it should be.
-
How do you pull the existing ones off, mine started to come off at the front edge and i will get round to pulling them off and re sticking them down, are there clips? -
I'm going to remove this faulty clip and use better one.
Im in 50% sure that's what it is..
And see if it will help, will update you all tomorrow.
-
On the car
Front lifts up , with is not good, MK3 rubber is a bit harder/solid from MK2 and I think that ths is what cause it. Need to order another 2 samples of MK2 to be sure.
But it could be the damage front clip.
-
Trims arrived, preaty much same as MK2 only bit more solid under. Fits well on the car. I have spend some time yeasteday and today trying to fit clips.
Each trim is 115 cm long so there is plenty of trim if something will go wrong. But always start with the front, rear is a easy bit.
I have removed old clips 1st
After cuting front end relised that top part of the trim is to thick, so need adjusting.
Video :
Front
Rear
Ready, fronts could with a bit more cut in 1-3 mm but overall looks ok, I will go and fit this on the car and use it daily.
NEXT
I'm about to order first batch, once that will arrive I will know the total costs.
Im still not 100% sure on the price, so please do not ask.
I have fitted it on the car fits fine. It is to dark to take any pictures. I will do tomorrow.
Did you enjoy?
You can buy me a beer https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=URCZN3VZUUXHG&lc=GB&item_name=Karmannski&amount=1%2e00¤cy_code=GBP&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted
-
I have received new sample yesterday, will put some pictures shortly.
Corrado Roof Moulding/trim Strips
in Exterior
Posted
250 sets