Lee Rees

Guys, I've brought some decent oil and some click 50 to put in my rado, the problem is I cannot get an oil filter in time for my long journey tommorow. Is it still beneficial for me to go ahead and do the oil change? I was just going to simply drain from the bottom of the sump and replace. Not even going to touch the oil filter at all, or try and drain it.

Thanks for the tip, an extra pair of hands will be on site to help aswell so I'm hoping this is going to be relatively easy. Although I'm quickly learning with cars that everything lives in hard to reach places! ---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ---------- Just one final question, if the motor is shot would the window fail to hold itself up?

ok guys I'm going to take the screw out and see what happens. I've seen lots of mechs + motor kits on ebay for cheap, are they all universal in compatibility.

OK Guys just an update, I brought a tool kit and some carb cleaner, took the ISV off, gave it a clean (wasn't really that dirty) put it back on and the problem has gone away. don't want to jinx it but it looks like it's been a success!

The end which im holding between my fingers doesn't join to anything, it's bare exposed wire. ---------- Post added at 7:28 PM ---------- Previous post was at 7:22 PM ---------- KIPVW can you ellaborate on the hose, what doesn't look right about it?

Hi guys, I was wondering if you could take a look at this pic, it's of my 93 2.9 Corrado. I do have idling probs (horrible idling and stalling) and have yet to diagnose the prob, however I found the following cable just hanging there, what do you think it could be for? [ATTACH=CONFIG]56305[/ATTACH]

Thanks for the reply, is the window particularly heavy, as in if I take the screw out will I be able to support the window. Obviously I don't want the window to just drop and smash.

Well if you're ever in Newquay cruising in your rado and you spot me give us a bib and I'll pull over. I'd love to see another rado up close. It'll either be me or my mate driving it as we are car sharing.

Cheers guys, my cable arrived a few days ago (blue cable), haven't been able to connect it yet as I'm waiting for the OBD converter block.

Hi guys, I've decided to take this into a garage and get them to fix the brakes, I've brought new pads, discs and bearings and will just let the professionals take care of this one. With regards to the ISV, I did try to get to it but came unstuck as you need a star alan key, will have to buy a set, what size does it need?

Hi Guys, My left side window is stuck up. If I press the up/down switch I can hear it trying to open but it doesn't move. I decided to take the panel off and this is what I found. [ATTACH=CONFIG]56293[/ATTACH][ATTACH=CONFIG]56297[/ATTACH][ATTACH=CONFIG]56301[/ATTACH] As you can see by the screw, it looks like it's holding the window in place as it goes through the lifting arm. If I took the screw out does this mean the window would drop down hard and smash? Can anybody think why the previous owner would do this? it seems like a very drastic measure. Obviously I want to fix this problem so any help into diagnosing it would be helpfull.

Hi Guys, here is a video of the sound the rear drivers side wheel is making. [video=youtube_share;EklfwYaqbcw]

i have this exact problem on my vr6, get a grinding noise that goes whoosh whoosh whoosh as the wheel turns, it only does this when driving though.

had it up on a jack and the disc feels a little tight in one spot, also there is no play in the wheel so guess that mean it's not the bearings. [ATTACH=CONFIG]55061[/ATTACH][ATTACH=CONFIG]55065[/ATTACH][ATTACH=CONFIG]55069[/ATTACH] Window just doesn't work at all, when i press the button i hear a slight electrical hum coming from rear of car, weird. Sorry to be lazy but can someone point me to a guide for cleaning the ISV and MAF. I don't have VAGCOM yet, going to see what socket mine is and then order the cable from ebay. I'm going to record a video of the whoosing sound tommorow and post it up. No pictures as yet, we need to do some spraying on the rust first. Me and my mate are sharing the car, he is a professional photographer so once it's all fixed up he's going to take some awesome pictures. However you can see it in it's current state here: http://pistonheads.com/sales/3685776.htm

I went for a vr6 2.9 in the end. I don't know why I was even worrying, I got 35mpg all the way from clacton to cornwall, cost about £80 in fuel which is very good going.