stormseeker 0 Posted May 29, 2003 just noticed that there's a loose strap (looks like a grounding strap) near the ECU that's only connected at one end (to the engine side bulkhead). Where should the other end go??? Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted May 29, 2003 to the bonnet hinge?? Quote Share this post Link to post Share on other sites
Jim 1 Posted May 29, 2003 I had to replace mine once... there should probably be a bit of rusted metal on the bonnet hinge (as dazzy said) where it used to go... just undid one nut on mine, and put the replacement on without any problems. Think it did cost about £10 for a new one though.. bloody stealers. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 30, 2003 You don't need that strap, all it is does is earth out the bonnet to neutral so that engine electrical interference is contained within the bonnet as part of the UK electrical noise emission regulations. In other words, that strap stops people's TVs and radios going fuzzy when you drive past. Pull the strap off, it servers no other purpose (ECU has many grounds) and is not an MOT requirement. Cheers Kev 94 VR6 Quote Share this post Link to post Share on other sites
G60Jet 1 Posted May 30, 2003 stormseeker, Chris you should have one for the bonnet and one from the bulk head to the throttle body i think not 100% cos toy have a VR but thats the set up on my late G60 Quote Share this post Link to post Share on other sites
