STORM 2 0 Posted January 27, 2005 hi all, just got my ISV off the VR6, just wondering HOW I'm supposed to get inside it??????? :oops: :oops: Does the plastic end with the harness connector twist off? thanks in anticipation Quote Share this post Link to post Share on other sites
theRuler 0 Posted January 27, 2005 i just sprayed cleaner down the hole should i have stripped it? Quote Share this post Link to post Share on other sites
STORM 2 0 Posted January 27, 2005 i don't know - i was wondering if it came apart? Quote Share this post Link to post Share on other sites
theRuler 0 Posted January 27, 2005 i filled mine with nuff carb cleaner let it soak for a bit it made sod all difference though. so maybe what i did wasnt right. Quote Share this post Link to post Share on other sites
corradophil 3 Posted January 27, 2005 If its like an 8v or 16v one it is a sealed unit, all you can do is wash it through where the hoses connect. Although I managed to strip mine on my 8v Golf, but its a tricky job. Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted January 27, 2005 Don't think you can strip it. Just completely fill it with carb cleaner, and leave it soaking for a while. Actually made a bit of difference on my VR when I did this. Seemed to run smoother. Quote Share this post Link to post Share on other sites
theRuler 0 Posted January 27, 2005 well what i did was right then it seemed to make sence at the time. however it hasnt stopped hollywood contacting me to ask if they can use my car in chitty chitty bang bang 2 Quote Share this post Link to post Share on other sites
STORM 2 0 Posted January 27, 2005 ok chaps - will do that then - cheers Quote Share this post Link to post Share on other sites
