Stroller 0 Posted May 4, 2005 I am based in Surrey, but will travel. I am looking for someone who knows the Corrado VR6 inside out to solve an ongoing running problem that I have had for some time (engine cuts out, flatspot on accelerator etc). I have had several pieces replaced, but still have problems. From the forum I have picked up: 1) German Auto Engineering, Portsmouth (Cornelius) 2) Darren aka G-man (http://www.pitstopdevelopments.com) 3) John 16vG60?? I just wanted to check if there was anybody else really close to me before I contacted Cornelius, who sounds to be the business. [schild=standard fontcolor=000000 shadowcolor=C0C0C0 shieldshadow=1]Any ideas everybody?[/schild] Thanks Stroller Quote Share this post Link to post Share on other sites
dinkus 10 Posted May 4, 2005 Vince at Stealth is the godfather of the VR6, but it's up Northampton way, so not wildly close to you. Quote Share this post Link to post Share on other sites
Jim 2 Posted May 4, 2005 Stealth is closer to Coventry/Birmingham area than Northampton really.. but yeah, as dinkus says, there ain't a lot about VR6's that they don't know! :) Quote Share this post Link to post Share on other sites
dinkus 10 Posted May 4, 2005 Actually, Vince is the only person to get his own description tag on CF... I wonder if he knows that? :lol: Quote Share this post Link to post Share on other sites
Jim 2 Posted May 4, 2005 I didn't wanna be the one to tell him.. maybe his buddy Haywire can tell him next time he is there :D :) Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 4, 2005 LOL.... I can certainly apply my 'usual' checks/fixes but can't guarantee anything....but I've sent a few VR6 customers home happy in the past :wink: Quote Share this post Link to post Share on other sites
dinkus 10 Posted May 4, 2005 I've sent a few VR6 customers home happy in the past :wink: :lol: I don't doubt it ;) Quote Share this post Link to post Share on other sites
Jim 2 Posted May 4, 2005 LOL! Keeping on topic though, AmD still know the VR6 engine pretty well.. they are based in Bicester in Oxfordshire. Their website is @ http://www.amdtechnik.com ! Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 4, 2005 Hmmm, I'd rather insert wasps into my prosteria than take my VR6 to AmD. Stealth are only a stone's throw from Bicester and they have more enthusiasm, less arrogance and more knowledge than AmD. Quote Share this post Link to post Share on other sites
oxfordpaul 0 Posted May 4, 2005 Well AMD sorted my VR after several other unsuccessful attempts with a running problem from other garages so I'll always use them...ask for Craig. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 4, 2005 You did OK then...but equally I know of people that left AmD with more problems than they went in with. Quote Share this post Link to post Share on other sites
Andi 2,147,483,647 Posted May 4, 2005 Stroller, Darren specialises in G60s and doesn't really take on VR work. John 16vG60 is a more than helpful fellow who will look after your car and offer advice over the phone, etc. Warning, he can talk a bit, so ring him the cheapest way you can... lol Quote Share this post Link to post Share on other sites
Stroller 0 Posted May 4, 2005 Thanks for all your input guys, it's much appreciated. I may have mised something here, but what are the contact details for John 16vG60? And what about Cornelius at German Auto Engineering in Portsmouth; that is straight down the A3 for me! Thanks :) Stroller Quote Share this post Link to post Share on other sites
Andi 2,147,483,647 Posted May 4, 2005 but what are the contact details for John 16vG60? 07974 020031 He posts it himself enough times on the forum, so I'm sure he won't mind it again... :) Quote Share this post Link to post Share on other sites
anubis 0 Posted May 4, 2005 There's always Danny at MCM, [near Guildford]....hard to get hold of, but knows his stuff, and a nice guy to boot! :D As for AmD, bunch of bandits. Took the VR there for a few things in November, including fitting the coilovers. Thought the car was sitting a bit strangely, so when I took it in to another garage, as I suspected, AmD had put the coilovers on about 5mm lower on the divers side, leaving the car lop sided!! ***** :mad: As well as having to put up with the attitude that you get from them, as kevhaywire says. AmD.....Never again. Quote Share this post Link to post Share on other sites
gradeAfailure 0 Posted May 4, 2005 Ah, so it's your VR that I saw in Danny's workshop, anubis - looks rather nice! Yeah, if you can get through to Danny at MCM (might as well try getting blood from a stone!) then he def knows his stuff... Factor in having to clean your car afterwards though as his workshop is at the end of a muddy/dusty lane! Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted May 4, 2005 As for AmD, bunch of bandits. , as kevhaywire says. AmD.....Never again. Thank you my man. AmD seriously are stuck up their own bum holes. They do chipping work (with 'creative figures') for their 'bread and butter' work across many marques but they know nothing of any value about the older VAG cars, such as the VR6. And besides which, half of AmD (Geoff Everett - Degree in Automotive electronics and co-founder of the company) left yonks ago!!! So what does that suggest? I know of someone that found an AmD ratchet left under the bonnet and what was supposed to be a standard fuel gauge replacement on a VR, ended up with a white guage from a G60 - amongst the standard Orange VR6 guages.....the plums! I'm sorry but I don't know where AmD get their reputation from but I for one am not believing their Bull Sh1t rechipping figures (and I can prove that) and I have no faith in their mechanical skills either. Stealth all the way..... Quote Share this post Link to post Share on other sites
anubis 0 Posted May 4, 2005 Cheers Agrade, Yes it is.......it's even better when it moves!! :D Quote Share this post Link to post Share on other sites
Stroller 0 Posted May 8, 2005 There's always Danny at MCM, [near Guildford]....hard to get hold of, but knows his stuff, and a nice guy to boot! Anubis, have you got contact details for Danny at MCM? Thanks Stroller Quote Share this post Link to post Share on other sites