turbocorrado 0 Posted September 29, 2003 one more repair needed for mot... can anyone help... my full beam will not stay on (they flash but dont stay on). i've replaced the indicator stalk twice but to no avail. all fuses are ok. can anybody help please. Quote Share this post Link to post Share on other sites
brian g60 corrado 0 Posted September 29, 2003 sounds to me like a relay faulty or wiring problem ,try tapping each relay one at a time while activating full beam this may show were your fault is.also visualy check all wiring. 8) Quote Share this post Link to post Share on other sites
dazzyvr6 0 Posted September 29, 2003 does the stalk click when you pull it towards you? Quote Share this post Link to post Share on other sites
Henny 0 Posted September 29, 2003 Have you got an aftermarket steering wheel on the car? Could have something to do with it if you have... 8) Quote Share this post Link to post Share on other sites
Supercharged 2 Posted September 29, 2003 If you have an uprated loom, you may just have the wires connected the wrong way round. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted September 29, 2003 If you have an uprated loom, you may just have the wires connected the wrong way round. You'd never catch me doing that :lol: Kev Quote Share this post Link to post Share on other sites
2cc 0 Posted September 30, 2003 Do I sense a story here Kev? :D I'd be thinking relay hold on supply since fuses and stalks've been checked Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted September 30, 2003 Do I sense a story here Kev? :D I'd be thinking relay hold on supply since fuses and stalks've been checked He he, when my battery was removed last, the wiring loom cables were disturbed and I connected them the wrong way round! Kev Quote Share this post Link to post Share on other sites
