Jump to content
Sign in to follow this  
Lemon

Not pulling past 4000 rpm, well only slowly!!!

Recommended Posts

Hi I have a 1989 1.8 16v. When excelerating hard the engine seems to pick up well to start with then after about 4000 rpm, when the 16v engine normal pulls like a train it then seems to struggle getting to the red line!!! Very Strange. Had new fuel pump and filter, new lift pump, new distributor, rotor arm, new magnecor leads, new spark plugs. All the bits that may not help this sympton, but still no better. Anyone got any other ideas. Cheers.

Share this post


Link to post
Share on other sites

Have you checked the fuel system delivery and operating pressures. The fault is occuring when the engine is under higher loading. Your problem could be with the operation of the metering head and aiflow sensor. It could quite simply be a matter of the air and fuel supply being unable to match the demand under high load, due to wear or blockage. Would recommend you have the fuel /induction system checked for operation as replacement therapy gets a little expensive.

Share this post


Link to post
Share on other sites

I did not refit the new filter VW gave me on the lift pump as there where no clips as per the old filter to secure the base of the new filter? So refitted old filter as that comes with two clips. Any idea why they changed the filter. thanks for your help, not sure if that would cause a restriction???

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...