VR6 Clocks, 16v Inlet, Warm Up Regulator, Window + More

[87 Jetta 16v 0]

Hi all,

 

I have a few bits and bobs that I no longer need that could be of use to someone. All items are located in Reading Berkshire, however, I can post at cost.

 

VR6 Clocks. Temperature guage not working, everything else is perfect, and can be switched out for other guage. Approx 110k mileage. £20

 

 

Boot carpet. Humped type. £10.

 

 

1.8 16v KR inlet manifold. £20

 

 

Passenger glass. Has been etched, but no scraches. £5

 

 

1.8 16v KR Warm up regulator. Has had stealth WUR mod. £20

 

Thanks for looking,

 

Neal.

Edited February 4, 2013 by 87 Jetta 16v

[gNo 10]

I'll take the bonnet release fixings please.

[Riley 0]

Hi mate, First dibs on the late door handle (With raised key hole) if you can confirm it's the drivers side (Looks like it) but must be nice and tight with little play before latching?

 

And I'll take the headlight switch too.

 

£30 posted? Can Paypal straight away as a gift.:thumbleft:

 

Neil.

[daves16v 1]

Sorry to say the door handle strikers are not supplied by myself.

[wbx6dan 10]

Hi there can i take the rad brackets and the seat knob for a £10 posted?

cheers Dan

[87 Jetta 16v 0]

I'll take the bonnet release fixings please.

 

No problems. I will drop you a PM with payment details.

 

---------- Post added at 4:34 PM ---------- Previous post was at 4:28 PM ----------

 

Hi mate, First dibs on the late door handle (With raised key hole) if you can confirm it's the drivers side (Looks like it) but must be nice and tight with little play before latching?

 

And I'll take the headlight switch too.

 

£30 posted? Can Paypal straight away as a gift.:thumbleft:

 

Neil.

 

Hi Neil,

 

I have just taken a good look, the late one is indeed the drivers side. It worked perfectly on removal, latched and unlatched perfectly and sat correctly, however it is a bit floppy when not in the door...please let me know if that is still ok with you.

 

Thanks,

 

N.

 

---------- Post added at 4:35 PM ---------- Previous post was at 4:34 PM ----------

 

Sorry to say the door handle strikers are not supplied by myself.

 

My apologies Dave. I bought one of your kits years ago and it looked very similar. My mistake. I have amended the first post.

 

---------- Post added at 4:36 PM ---------- Previous post was at 4:35 PM ----------

 

Hi there can i take the rad brackets and the seat knob for a £10 posted?

cheers Dan

 

Hi Dan,

 

I am happy with that. I will drop you a PM with payment details.

 

Thanks,

 

N.

[_Meth 0]

The pair of door handles, early or late?

[87 Jetta 16v 0]

The pair of door handles, early or late?

 

Erm, one of each actually... :$ They are both the same fitment, just look a little different around the key slot....

[_Meth 0]

Ok I need a passengers side one. How much for that posted? Do you have a key for it?

[87 Jetta 16v 0]

Ok I need a passengers side one. How much for that posted? Do you have a key for it?

 

Hi there,

 

Would £24 posted in the UK sound ok? I don't have the key, but if I were you, I woulds swap the barrel over so it matches your other locks. It's only one circlip :)

[_Meth 0]

Call it £20 posted and we have a deal :) Drop me a PM with payment details :)

 

Cheers,

Dave

[Riley 0]

Hi Neil,

 

I have just taken a good look, the late one is indeed the drivers side. It worked perfectly on removal, latched and unlatched perfectly and sat correctly, however it is a bit floppy when not in the door...please let me know if that is still ok with you.

 

Thanks,

 

N.

 

Neal, did it have any movement/slack in it when fitted? Just that this is the problem with my current one (Pulls a long way before catching) so obviously I don't want to replace it with one that has the same issue. If you can confirm that then pm me payment details for that and the switch please mate.

 

Presume £30 posted is good for both...

 

Neil.

[87 Jetta 16v 0]

Neal, did it have any movement/slack in it when fitted? Just that this is the problem with my current one (Pulls a long way before catching) so obviously I don't want to replace it with one that has the same issue. If you can confirm that then pm me payment details for that and the switch please mate.

 

Presume £30 posted is good for both...

 

Neil.

 

Hi Neil,

 

I have dropped you a PM,

 

Cheers,

 

N.

[Riley 0]

Payment sent.

 

Neil.

[87 Jetta 16v 0]

All packed and ready to post tomorrow. Cheers. N.

[Riley 0]

Hi Neal, received the handle and headlight switch thanks. Unfortunately the handle is actually broken :-( I've not seen one broken like this before! :scratch:

 

Just trying to upload pics but not sure it's working...

[ATTACH=CONFIG]72096[/ATTACH]

 

[ATTACH=CONFIG]72097[/ATTACH]

 

[ATTACH=CONFIG]72098[/ATTACH]

 

[ATTACH=CONFIG]72099[/ATTACH]

Edited February 7, 2013 by Riley

[poll250 0]

Hi Neal,

 

I don't suppose you have an ABS Light part number 535 919 235 BA laying about anywhere do you? Also looking for a drivers side fog light.

 

Thanks,

Andy

[87 Jetta 16v 0]

Hi Neal, received the handle and headlight switch thanks. Unfortunately the handle is actually broken :-( I've not seen one broken like this before! :scratch:

 

Just trying to upload pics but not sure it's working...

[ATTACH=CONFIG]72096[/ATTACH]

 

[ATTACH=CONFIG]72097[/ATTACH]

 

[ATTACH=CONFIG]72098[/ATTACH]

 

[ATTACH=CONFIG]72099[/ATTACH]

 

Hi there,

 

Not good news with the handle. That would probably explain why it was "floppy" then! Do you want to bolt it in and see how the fit is? When I removed it it was working perfectly. If you are not happy with the fit I am happy to refund.

 

Thanks,

 

N.

 

---------- Post added at 8:31 PM ---------- Previous post was at 8:28 PM ----------

 

Hi Neal,

 

I don't suppose you have an ABS Light part number 535 919 235 BA laying about anywhere do you? Also looking for a drivers side fog light.

 

Thanks,

Andy

 

Hi Andy,

 

I don't have either to hand, that said, I might have an abs light somewhere. Trying to have a clearout of stuff that I am not going to use atm. I'll let you know. How is the vrt going?

 

Cheers,

 

N.

[Riley 0]

Hi Neal,

 

I'm really short on time lately so haven't had a chance to have a proper look as yet. But I'm a bit of a perfectionist so I don't think I'll be using the handle. Would you like me to send it back?

 

Neil.

[Riley 0]

Want me to send it back Neal?:thumbleft:

[87 Jetta 16v 0]

Hello mate,

 

No, lets not bother wasting the postage. If you want to strip the mech out as a replacement for your current handle that might work for you?

 

Do you want to drop me a PM with an amount you would like for a refund and I will get it back to you ASAP :)

 

Cheers,

 

N.

[Riley 0]

Hi Neal,

 

Unfortunately my handle (Already with an uprated striker from Dave on here) has broken at the larger pin fitting so there's nothing I can do to fix it. If you can fire the £20 quid back please that would be great (Volksdevil at hotmai|.com) I'll throw the handle in the bin, unless you want me to pop you the striker back?

 

Neil.

[87 Jetta 16v 0]

All done Neil. Sorry for raising your hopes!!

 

N.

[Riley 0]

Thanks Neal and no problem, mine is still working...for now although not for long I suspect lol!

 

Also, I'd just like to point out to anyone else that I'm sure that Neal genuinely didn't realise the handle was broken (Never seen one broken there before myself either) and items were posted quickly etc. Good guy to deal with, thanks mate. :thumbleft:

 

Neil.

[Ralphead 0]

What's the stealth mod on the warm up regulator? Would you be able to get it sent to me next-day asap? I'll PM you my number. Thanks