Jump to content
MurdoMac

Heater control pannel light

Recommended Posts

 

Well although the LED system maybe the best way to go I thought I'd give this a go for it's simplicity... took about an hour to do most of that was spent with the car wiring the actual unit was fitted in 5 mins.

 

Heres the box...comes safely packaged

 

DSCF6815_zps34d2d4c5.jpg

 

Whats inside (I got the transformer aswell) With the heater control panel off.

 

DSCF6809_zps6ea4b2d1.jpg

 

 

Remove these bits, they just pop off no problem.

 

DSCF6814_zpsf27455fb.jpg

 

And the finished item.

 

DSCF6816_zpsbc933cae.jpg

Share this post


Link to post
Share on other sites

That looks good - what was the total cost, if you don't mind me asking?

 

I need to redo my panel - I had e l wire glued in place, but the inverter blew up, so I took all the wire out. My dash is red, so I'll order the white once and put some red gel between it - I'll also mix in some blue so the heat control will be half blue and half red :cool:

Share this post


Link to post
Share on other sites
That looks good - what was the total cost, if you don't mind me asking?

 

I need to redo my panel - I had e l wire glued in place, but the inverter blew up, so I took all the wire out. My dash is red, so I'll order the white once and put some red gel between it - I'll also mix in some blue so the heat control will be half blue and half red :cool:

 

Was 50 EUROS delivered thats including the transformer, not the cheapest option but I guess you pay for convenience & Corrados :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...